for hydraulic brakes
For repair, installation and conservation of brake internal parts. Ensures the necessary lubrication and preservation. Is applied thinly and evenly on the cylinder surfaces, the pistons and the sealing elements. It is compatible with brake fluids DOT 3, DOT 4 and DOT 5.1

special lubricant for brake repairing, metal-free, suitable for use on aluminum brake calipers
Prevents the brake pads from rusting in the caliper guides and the occurrence of brake squeals. For this purpose, all guide surfaces on the caliper and the back plate of the brake pads must be painted before mounting the brake.
Features: high temperature resistance, very good corrosion protection, long-term resistant, water-insoluble, compatible with all metals

Note: Brake disc and brake pad friction surfaces or rubber parts must a not be painted with ATE Plastilube!

for exhaust systems, heat resistant till 1000°C, asbestos-free
Creates 100% gas-tight pipe connections, facilitates installation and hardens through the exhaust heat

leak test fluid for detecting spots where gas and compressed air may escape
Locates leaks on tanks, pipes, hoses, screw joints, welding seams, flange connections and fittings. In automotive maintenance during repairs on compressed air brake systems and air conditioners such as trucks, busses, cars, commercial vehicles. In industry during test and maintenance work on compressed air, gas lines and plants. Water-based and biodegradable test fluid filled with environmentally friendly propellant.

for sealing exhaust parts, service temperature range up to approx. +700°C, asbestos-free
For gas-tight installation of exhaust systems, tailpipe trim, screw and plug connections and flame rings. Installed pipes do not seize up and can be easily removed.

copper paste/spray, universal use, temperature range from -30°C to +1100°C
For lubrication and as corrosion protection for thermally highly stressed connections. Chemical and petrochemical industry, electric power plants, ceramic industry, machines and vehicle manufacturing (here especially in threaded connections to exhaust manifolds, mufflers, chassis parts). Eliminates squeaking, is resistant to salt, hot and splash water, non-skid, lubricating and separating, protects against welding and burning and prevents vibration transmission.

semi-synthetic, metal-free, white high temperature paste, application range from -40°C to 1400°C
Universal use, resistant against hot and cold water, as well as to acids and alkalis. For lubrication of highly loaded sliding surfaces of all kinds. Especially for low speeds and oscillating movements. Separation of components subject to heat stress. Corrosion protection at bolts, pins, studs, flanges, spindles and fittings. Prevents seizing, cold welding, rust freezing and stick-slip

synthetic special lubricant for the brake esystem
For the entire brake system at disk brake pads, studs, pins as well as contact points for drum brakes. Separating paste for centering rings on aluminum rims, connection points between rims and wheel hubs and other plugged and screwed connections. Prevents and eliminates squealing sounds from brakes that occur between the brake caliper pistons or contact points and brake lining. Secures the function of the entire brake system, as well as the seizing or rust freezing of the rims on the wheel hubs. Application range -40°C to +1200°C

synthetic, metalfree slicing paste
Prevent seizing or rust freezing of the rims on the wheel hubs. When used properly, the product's excellent adhesion properties avert spin-off, even at high wheel speeds. The product can also be used for lubrication at screw connections or for repair and maintenance work on brake systems. Separating paste for centering rings on aluminum rims, connection points between rims and wheel hubs, for other plugged and screwed connections and for repair and maintenance work on brake systems. Temperature working range: from -40°C up to +1400°C

Attention: Do not apply to the friction surface of brake pads or brake discs!

ceramic paste, operating temperature range: -40°C to +1400°C
For the lubrication of highly loaded sliding surfaces of all kinds e.g. screw, plug and bayonet connections of steel and non-ferrous metals. For the separation of temperature-stressed components e.g. of combustion engines, turbines and motor vehicle brake systems. Corrosion protection on screws, pins, bolts, flanges, spindles and fittings. About 90% of all standard paste applications can be covered. For lubrication and wear protection, for separation and as corrosion protection. Has an excellent hot and cold water resistance, as well as a very good resistance to acids and alkalis and prevents brake sounds, the burning and cold welding, as well as stick-slip.