SAE 0W-20, synthesis technology, approvals: ACEA C5, API SN PLUS + RC, ILSAC GF-5, BMW Longlife-17 FE+, MB-Freigabe 229.71, Opel OV0401547, specifications / manufacturer's recommendations: Chrysler MS-12145, Fiat 9.55535-GSX, Ford WSS-M2C 947-B1.
note: The operating regulations of the vehicle and engine manufacturers must be observed.

SAE 0W-20, sythesisi technology, approvals: API SN Plus + RC, ILSAC GF-5, specifications / munufacturers recommendations: Chrysler, Ford WSS-M2C 947-A, Ford WSS-M2C 947-B1, GM dexos1 Gen 2, Honda, Hyundai, Kia, Mazda, Nissan, Toyota. Modern premium-class fuel-efficient engine oil, which especially has been developed for the year-round use in Asian and American vehicles.
Note: The operating regulations of the vehicle and engine manufacturers must be observed. The optimum effectiveness is only possible with unmixed use.

SAE 0W-20, synthesis technology, approvals: ACEA C5, Volvo VCC RBS0-2AE. This lubricant was developed primarily for use in various Volvo models. Tested safe with catalytic converters and turbochargers.
Note: The operating regulations of the vehicle and engine manufacturers must be observed.

Sae 0W-20, synthesis technology, approvals: VW 508 00, VW 509 00, specifications / recommendations: ACEA C5, Porsche C20. For various models of Audi, Porsche and VW. Use only in gasoline and diesel engines with a particulate filter that require a lubricant of VW standard 508 00/509 00 or Porsche C20. Tested for use with turbochargers and catalytic converters.
Note: The operating regulations of the vehicle and engine manufacturers must be observed. Not backwards compatible.

SAE 0W-20, HC synthesis, approvals: BMW LONGLIFE-17FE+, MB 229.71, Opel OV0401547, Volvo VCC RBS0-2AE, Jaguar / Land Rover STJLR.03.5006 specifications / manufacturer's recommendations: ACEA C5, API SN Plus, API SN/RC, Aston Martin, BMW LONGLIFE-14FE+, Chrysler MS 12145, Fiat 9.55535-GSX, Ford WSS-M2C945-A, WSS-M2C945-B1, WSS-M2C946-A, WSS-M2C946-B1, WSS-M2C947-A, WSS-M2C947-B1, GM DexosD, ILSAC GF-5, Jaguar / Land Rover STJLR.51.5122, Mitsubishi
This HC synthetic engine oil has been specially developed to meet Opel specification OV0401547. The extremely low viscosity grade of this lubricant allows the latest engines to achieve the specified fuel economy targets. In addition, the engine oil forms a strong layer that absorbs harmful particles and keeps the engine clean and protected. Suitable for a range of modern diesel and gasoline engines for cars and light trucks equipped with or without exhaust aftertreatment systems. In addition, it can be used with the latest fuel types, such as biofuels and ethanol-based fuels. The API SN Plus specification demonstrates the lubricant's compatibility with highly fuel-efficient GDI engines, where the oil prevents LSPI from damaging engine components.
Note: The operating instructions of the motor vehicle and engine manufacturers must be followed.

SAE 0W-20, HC synthesis, approvals: MB 229.71, specifications / manufacturer's recommendations: ACEA C5, ACEA C6, API SN Plus, API SP, Ford WSS-M2C952-A, GM DexosD, ILSAC GF-6 A, Jaguar-Land Rover STJLR.03.5006, Opel OV0401547
This product was developed specifically in view of the demanding requirements of the current C6 standard (applicable where ACEA C5 is recommended). A standard where protection from LSPI (Low Speed Pre-Ignition), fuel efficiency and low CO2 emissions are important. It meets the current Ford WWS-M2C952-A specification, which is required for the latest Ford Ecoblue engines (diesel).
Note: The operating specifications of the vehicle and engine manufacturers must be followed.

SAE 0W-20, synthesis technology, specifications / manufacturer's recommendations: ACEA C5, API SP, Ford WSS-M2C 952-A1, Jaguar / Land Rover STJLR.03.5006, MB-Approval 229.71, Opel OV0401547
For gasoline and diesel vehicles, especially for the requirements of Ford, Jaguar / Land Rover, Mercedes-Benz, Opel, GM and other manufacturers. LIQUI MOLY additionally recommends this product for vehicles or aggregates for which the following specifications or original spare part numbers are required: GM dexos D

Note: The operating instructions of the vehicle and engine manufacturers must be followed. Optimum effect only in unmixed condition.

SAE 0W-20, HC synthesis, approvals: Volvo VCC RBS0-2AE specifications / manufacturer's recommendations: ACEA A1/B1-12, ACEA C5-16, API SN, Fiat 9.55535-DM1, Fiat 9.55535-DSX
HC synthesis lubricant specifically for gasoline and diesel engines with direct injection that comply with the Volvo Engine Architecture (VEA, Volvo Engine Architecture). This VOLVO VCC RBS0-2AE specification requires high oxidation stability to allow long oil change intervals of up to 30,000 km. Compared to a reference oil, fuel savings of 3.4 % are achieved.
Note: The operating instructions of the vehicle and engine manufacturers must be followed.

SAE 0W-20, fully synthetic, approvals: GM - Dexos1 Gen 3, specifications / manufacturer's recommendations: API - SN Plus, API - SN/RC, API - SP, API - SP/RC, ILSAC - GF-5, ILSAC - GF-6 A, Acura-, Buick-, Cadillac-, Chevrolet-, Chrysler-MS 6395, Dodge-, Fiat - 9.55535-CR1, Fiat - 9.55535-GSX, Ford - WSS-M2C945-A, Ford - WSS-M2C946-A, Ford - WSS-M2C947-A, Ford - WSS-M2C962-A, GMC-, Jeep-

This product was developed specifically in light of the demanding requirements of the latest "GM Dexos1 Gen 3" specifications and "ILSAC GF-6 A" standard, for which high fuel efficiency and low CO2 emissions are of great importance. It provides the performance needed to meet the demands of the most advanced gasoline-engine passenger cars from U.S. and Asian manufacturers. Thanks to its low viscosity and excellent flowability, this oil significantly reduces wear and ensures fuel savings and lower CO2 emissions. The optimized additive package reduces the formation of soot and deposits and keeps the engine clean. It is suitable for hybrid vehicles when OEM specifications are met.

Note: The operating instructions of the vehicle and engine manufacturers must be followed.

SAE 0W-20, HC-Synthesis, Approvals: BMW LONGLIFE-17FE+, MB 229.71, Opel OV0401547, Volvo VCC RBS0-2AE, Jaguar / Land Rover STJLR.03.5006 Specifications / recommendations of the manufacturer: ACEA C5, API SN Plus, API SN/RC, Aston Martin, BMW LONGLIFE-14FE+, Chrysler MS 12145, Fiat 9.55535-GSX, Ford WSS-M2C945-A, WSS-M2C945-B1, WSS-M2C946-A, WSS-M2C946-B1, WSS-M2C947-A, WSS-M2C947-B1, GM DexosD, ILSAC GF-5, Jaguar / Land Rover STJLR.51.5122, Mitsubishi
This HC-Synthetic engine oil has been specially developed to meet the Opel specification OV0401547. The extremely low viscosity grade of this lubricant enables the latest engines to achieve the specified fuel consumption targets. In addition, the engine oil forms a strong layer that absorbs harmful particles and keeps the engine clean and protected. Suitable for a range of modern diesel and gasoline engines for passenger cars and light trucks equipped with or without exhaust aftertreatment systems. It can also be used with the latest fuel types, such as biofuels and ethanol-based fuels. The API SN Plus specification demonstrates the lubricant's compatibility with highly fuel-efficient GDI engines, where the oil prevents LSPI from damaging engine components.
Note: The operating instructions of the vehicle and engine manufacturers must be observed.