Balance Weight
adhesive weight strip, steel, black
Flat design (3,8mm), with premium adhesive tape, powder coated, 100 pieces
Balance Weight "Der Alleskönner"
standard, for steel rims, zinc
universal, suitable for most steel rims. Fine zins coating with elastic poly coating. It is recommended to use of a weight pliers with plastic impact part
Balance Weight
adhesive weight strip, for alloy rims, steel
Flat design (3,8mm), with elastic poly coating
REINHEIMER Rubber Valve
for tubeless car tires (snap-in)
REINHEIMER Valve Insert "C1-9002"
3 pieces, brass nickel-plated, with red seal ring for high operating temperatures
Due to the design, this special insert is suitable for a large number of valve types and also for special valves. For trucks, cars and motorcycles, opening pressure higher as 4,5 bar, working pressure lower as 20 bar, temperature range: - 60°C - 200°C
REINHEIMER valve cap
package unit: 100 pieces
metal valve cap, VG8, gas-tight
brass nickel-plated, with flat silicone ring seal
- Article number: 43204791
- Original number: 071312
key cap, VG8 (valve cap with valve insert screw)
brass nickel-plated, with a cup gasket made of silicone
- Article number: 43207737
- Original number: 071310
AD Balance Weight
standard, for alloy rims, zinc
universal, for usage on rims with normal rim flange
SERWO AUTOMOTIVE Wheel Bolt Bag
cotton, bag with double strap, 150 x 200mm
REINHEIMER Rubber Valve
snap-in, HP valve for transporter and caravans with tire pressure >5,5 bar
With continuous support tube made of brass into the rubber foot and an integrated safety support plate under the valve foot. Can be used up to a maximum material thickness of the rim of 1,8 - 3,0mm. This special construction makes it possible to fill the tires with an air pressure of up to 9 bar. The valve is an alternative if, for technical, constructional or other reasons, a metal valve can not be used.
Note: Prerequisite for the use of such valves, is a standard rim hole and a flat bearing surface on the inside of the rim for the valve foot, so that a secure seal is possible.
REINHEIMER rubber valves
Manufactured to DIN 7780, with gas-tight metal Valve Ccps
Can be used for tubeless tires on cars and motorcycles up to a maximum speed of 210 km/h. Maximum permissible deflection angle 25°. If this is not guaranteed by the wheel cap or other supports, the rubber valves must not be installed. In such cases, we recommend using metal valves.
Technical data:
Material: Rubber
Rim hole Ø: 11.3 mm
Length: 33 mm
Working pressure (max.): 4.5 bar
Axial pull-in torque (max.): 600 Nm
