paper masking tape, for all applications and systems
Good adhesion, stable paper ring, balanced creping for cornering, temperature resistance 1 sec. at 110°C, waterproof, solvent resistant. Specially developed for water-based paint systems and suitable for use in combination with wet grinding.

contour tape, temperature resistant at 120°C (30 min.)
For masking of disc rubbers and plastic parts, bonding of narrow radii, as well as for multicolour and design coatings. Water and solvent resistant, light removable.

for adhesive mass and sealants, nylon, 30mm wide
bristle length: 40mm, total length: 230mm, with hanging eyelet in handle and tinplte clamp, white bristles

length: 300m, 50 g/m², smooth at one side, quality according to DIN tested
Natronmix quality, high paint density and low air permeability (approx. 150 ml/min.), approx. 20cm roll diameter, 50mm sleeve

length: 450m, 40 g/m², smooth at one side, extreme tear resistant
100% kraft paper quality, very good paint density, extreme low air permeability (approx. 70 ml/min.), approx. 20cm roll diameter, 50mm sleeve

acrylic, filling / adhesive primer,corrosion protection, between Brunox epoxy and the topcoat
For priming or pre-painting of metal surfaces, corrosion protection, forms a strongly adhering surface, runs well, dries quickly, equalizes smallest unevenness, reduces the topcoat consumption. Can be painted over with water-based paints, air-drying acrylic, synthetic resin and nitro combination paints. Dust-dry after 20 minutes, hold after 30 minutes, sandable after 2-4 hours.
Note: Do not spray on synthetic resin paints!

1-component thick-film filler, for spot and partial coating
Has an extremely high filling and covering opacity, very good adhesion to steel, aluminum, polyester putty, old hardened paints, different plastics such as PC, PVC, ABS, PA, SAN, PU, UP and EP. Silicone remover resistant, suitable for wet and dry grinding, can be processed easily and quickly, dries quickly. Can be painted with water-based and solvent coatings.
Note: Not overcoatable with 1K filling primer HG1 and HG7.

primer for most car and truck plastic parts for indoor and outdoor
Adheres very well to bumpers, mirrors, and tuning parts. Is applied directly as a priming and can already after approx. 10 min. with air-drying e.g. ColorMatic 1K-primer, plastic lacquer or Pre-Fill Basislack overpainted.

for stone-chips repairing, suitable for all original car paints
Small, annoying damages can be removed fast and at a reasonable price, in a few points as well as extensive. Contains all necessary components, except the paint pen in the appropriate color.

Consisting of: 50ml paint repair fluid, 1 squeegee,1 polishing cloth, 1 one-way gloves; 1 "step by step" instruction, 1CD with application video

for colour refreshment / coloring of textile floor mats and carpets, 400ml spray can
Easy and fast lamination of stains and colour stints. With high opacity and good adhesion. Applicable on textiles and, by specific additives, also on elastic mats in passenger car and commercial vehicles.