elastic contour putty, only dry sandable
Especially for use on removable plastic parts. Good adhesion to steel, iron, aluminium, GFK and wood. High elasticity, short drying time and easy to sand.

1-component acryl putty, quick drying, beige For equalizing of small bumps, scratches and pores on putty surfaces, priming surfaces or filler surfaces as well as on GRP or polished old sprayings. Apply only in thin layers also a direct adhesion to steel, aluminum, galvanized steel substrates and following plastics: ABS, PVC hard, PC, PS, PA, PP/EPDM, POM and A-PET. Due to the modified viscosity setting, a creamy consistency is given, which ensures a pore-free and easy application. Application only in thin layers, recoatable with all conventional paint systems.

2-component polyester putty, incl. hardener
Mixture of medium-elastic, highly reactive, amine-accelerated polyester resin with various mineral, environmentally friendly fillers. Applicable to metal, wood, concrete. For filling holes and bumps, covering pre-treated surfaces when repairing body parts, etc. metal surfaces, repair and restoration of wood or concrete surfaces, e.g. steps, insertion of dowels and screws. Grindable after approx. 20 - 30 min., asbestos- and silicone-free, pot life at 20°C approx. 4 min., hardener addition 2 - 4%, temperature resistance on hardened material 120°C. Resistant to acids, bases, water and salts, suitable for stove enamel.

2-K polyester putty, with hardener, styrene-, asbestos- and silicone-free, white
Highly flexibole, quickly curing, temperature resistant with hardened material up to 120°C. To fill smaller imperfections and the thin fine plastered of already previously treated surfaces. Suitable for surfaces made of metal, wood, concrete or pre-filled with presto filling filler. Microfine fillers give a very smooth surface. Can be grinded after approx. 30 minutes, flash point at approx. 33°C, curing agent addition: 2 - 4%.

2-component with additional glass fibre
Mixture of several highly reactive, amine-accelerated polyester resins with various mineral, environmentally friendly fillers. For filling holes (up to 12mm Ø), perforation corrosion, perforations and bumps. Application on all surfaces and surfaces subject to stress and strain forces. Can be used on metal, wood, concrete, FRP in the automotive and mechanical engineering.

2-component polyester putty made of pure, unsaturated polyester resin and fiberglass parts
With adhesion promoter NT and mixing cap. For repairing large areas of damage in industry and in the hobby sector, which are already rusted through and subject to special mechanical stress. Can be used on metal, wood, concrete, many plastics, etc. Perforations can be bridged and stabilized, larger bumps filled. For repairing perforations up to a diameter of 12mm.

nitrocellulose basis
For surface treatment of rough surfaces and/or filling small scratches before subsequent top coats. Can be used on steel, aluminum, galvanized metal and paintable plastics. Ready for grinding at room temperature (RT) after 4h, curing with infrared (IR) possible with max. 60°C, best grit for grinding P 400 - 600.

asbestos-free 2-component putty, polyester resin base with aluminum pigmentation, incl. hardener, styrene-reduced
Specially designed for the high quality demands of vehicle construction and the repair trade in terms of processing, adhesive strength and sandability. The product is suitable for leveling depressions and unevenness on iron, steel, GRP and wood. Processing on vertical surfaces is possible without any problems. Properties: good sandability, high stability, high elasticity.

2-component based on polyester resin, incl. hardener
Reduces styrene, very easy to sand, with adhesion to sheet steel, aluminum, zinc and GRP. Can still be sanded after 24 hours with a large abrasion. The proportion of styrene is lower as 10%.

2-component filler on polyester base, grey
For steel base, GFK, wood or ground, viable old coatings. Particularly suitable for filling of bumps, strong sanding marks as well as roughly preprocessed repair points in a single operation.