400ml aerosol can, acrylic, quick drying, weather and light resistant
Especially suitable for simple repair paint finishes on automobiles and other vehicles

rust protection, versatile universal primer
For repairs on cars, motorbikes, as well as other vehicles or metal surfaces. Quick drying, with good filling power, high efficient, adheres well. Can be used on substrates such as iron, steel, hardened and ground old coatings, well-dried Mipa 1K and 2K filler materials.

acrylic, quick drying, highly pigmented
Excellent adhesion and resistance to mechanical and chemical loads. Particularly suitable for visually refreshing rims, hubcaps or other vehicle parts.

temperature resistant up to 300°C, tone corresponds roughly RAL 9006 - fresh hot dip galvanizing
Suitable as antirust primer, for coating of welding and drilling sites, as a conductive intermediate layer for spot welding and can be used everywhere, where metal must be protected against corrosion. Binder: modified alkyd resin

1K, acryl, colourless, non-yellowing protective coating with UV protection. Good weather and scratch resistance.
Note: Not suitable for use on bare iron, brass, copper and aluminum.

400ml aerosol can, silicone resin basis, high temperature resistant
For renovation, repair and beautify of heat-stressed items such as garden grills, ovens, furnace tubes, lamp shades, etc. High covering and filling power, good flow, smooth surface, quick drying and weather resistant. Drying (at 20°C, 50% relative humidity): grip-dry after 60 minutes, dry and temperature resistant after one hour heating-up at approx. 160°C. Yield: JDepending on the quality and color of the underground 400ml is enough for approx. 1,5m²

Attention: The object must be heated to 160°C for curing and when using on garden barbecues, please note that painted surfaces do not come into contact with the food. Coal pans can reach temperatures that exceed the maximum temperature resistance of the product.

Temperature resistance up to 400° C, contains 99 % pure zinc
Protects bare metals from corrosion. Adhesive, elastic, conductive, weldable, paintable application.

chromate-free 1K-repair filler based on epoxy resin
Also suitable as a corrosion protection primer and has a very high insulating effect against moisture. Can be used on sustainable , old ground paintwork and factory primers or directly on steel, aluminum and galvanized surfaces. Has a quick drying and very good griding ability. Due to the very fine atomization, run-off zones without coarse spray mist are possible in the spot repair area. Paintable with all common solvent and water-based 1K and 2K topcoat systems.

adhesion primer for a wide variety of substrates, UV-stable, colorless
Completely colorless, universal plastic primer for use on plastics commonly used in the automotive sector (e.g. PP-EPDM, ABS, PC, ABS-PC, PMMA, PA, PUR, PVC, GRP). Due to the special formulation, adhesion to other, difficult substrates, without prior sanding, is also possible without any problems. Mipa 1K-Haftpromoter can be used on steel, aluminum (also polished or anodized), galvanized substrates, stainless steel (also polished), non-ferrous metals (also polished), chrome-plated substrates, powder coatings and KTL coatings. The material offers great time savings due to fast drying and recoatability as well as the elimination of sanding. Can be painted over with Mipa 1-component and 2-component top coats. Mipa 1-component Adhesion Promoter is colorless and UV-stable and can therefore also be overpainted with Mipa clear coats.

2-layer acryl clear coat, high gloss, quick drying
Top coat for metallic based paints. Not suitable for use on bare iron, and brass, copper and aluminum. Scratch, shock and impact resistant, and non-fading and yellowing. Has a very good weather resistance and a high surface hardness with good elasticity at the same time.