2K acrylic thinner, flammable, for long drying time
For thinning or adjusting the viscosity, for painting Mipa 2K primers, 2K topcoats (vehicle varnish, acrylic varnish). Use and addition recommendations can be found in the respective product information of the base coatings.

2K thinner, special solvent mixture (fade-out thinner)
For the dissolution of spray mist on edges during spot repairs and paint finishes when processing Mipa 2K-HS coating systems. Can be used as a fade-out thinner for the following products: Mipa PUR HS, Mipa OC, Mipa 2K-MS-clearcoat, Mipa 2K-HS-clearcoat
Note from manufacturer: After the painting process, the outlet zones (spray mist areas) must be immediately overpainted with 2K-HS solver. Mipa 2K-HS solvers should only be applied in thin, even layers until the rough spray mist areas visibly smooth out. Do not apply too thickly, otherwise you will have drips or uneven surface.

special solvent mixture (fade-out thinner)
For the dissolution of spray mist edges during spot repair work and paint jobs. Also for loosening of existing old coatings (test suitability to prevent unintentional pulling up of the old paintwork) in order to improve the intermediate adhesion to the subsequent coating. Mipa 2K-solver must be applied evenly to the existing old paint work and overpainted within a few minutes. Can be used as fade-out thinner for the following products: Mipa AC, Mipa PUR, Mipa OC, Mipa 2K-MS-clearcoat.
Note from manufacturer: After the painting process, the outlet zones (spray mist areas) must be immediately overpainted with Mipa 2K solver. Mipa 2K solvers should only be applied in thin, even layers until the rough spray mist areas visibly smooth out. Do not apply too thickly, otherwise you will have drips or uneven surface.

2K acrylic thinner, flammable, for normal drying time
For thinning or adjusting the viscosity, for painting Mipa 2K primers, 2K topcoats (vehicle varnish, acrylic varnish). Use and addition recommendations can be found in the respective product information of the base coatings.

2K acrylic thinner, easy flammable, for short drying time
For thinning or adjusting the viscosity, for painting Mipa 2K primers, 2K topcoats (vehicle varnish, acrylic varnish). Use and addition recommendations can be found in the respective product information of the base coatings.

special EP-thinner, flammable
For thinning or adjusting the viscosity of epoxy systems. Usable for e.g. Mipa EP primer filler. Use and addition recommendations can be found in the respective product information of the base coatings.

solvents, also usable as spray thinner
For thinning, cleaning and dissolving KH paints, free from aromatics, highly flammable.

cellulose thinner, for solvent-based nitro, nitro combined coatings, air and oven-drying resin and Zapon varnishes
Use in the lacquer manufacturing and crafts. Can be used very well to clean brushes and painting equipment

cellulose thinner, for 2-component varnishes
Medium volatile solvent for thinning nitro, combination, chlorinated rubber, air-drying and stovable synthetic resin paints. Also suitable for 2-component paints based on Epikote as well as air and oven-drying Zapon paints. For cleaning spray guns, paint brushes etc. and for removing dirt, grease and paint stains. Applicable to wood, stone floors, glass, upholstery and carpets.

universal, medium volatile solvent
For thinning nitro, combination, chlorinated rubber, air-drying and stovable synthetic resin paints, 2-component paints, as well as air and oven-drying Zapon paints. Can be used in the washing, diving, spraying or flooding process.