MIPA Paint Additive "WBC-Controller 005"
mixing component in the Mipa WBC mixing system
To enhance the pearl and metallic effect. Mipa WBC-Contoller 005 is partly already a recipe component. The maximum proportion in the recipe must not exceed 10% by weight. In case of overdose, the intermediate adhesion to the clear coat can be negatively influenced.
Note from the manufacturer: mixing ratio: max. 10% Mipa WBC-Contoller 005 add to the mixed WBC recipe (Attention: The portion of WBC-Contoller 005 that may already be included in the color formulation must also be taken into account). Adjust the finished basecoat in the usual way with 10 - 20% Mipa WBC dilution to spray viscosity.
MIPA Primer Filler "WBS 1K"
water thinnable 1-component filler
Suitable for vehicle painting for iron, steel, zinc and aluminium. Paintable with any solvent and water based Mipa 1K and 2K top coats. Dries quickly and can be sanded. Suitable as insulating primer for thermoplastic old paints.
MIPA Panit Additive "WBS Thinner"
setting additive for Mipa WBC mixing system
For setting the prescribed spray viscosity. Mixing ratio: Mipa WBC 2-layer basicpaint + 10 - 20% Mipa WBC-thinner.
MIPA Paint Additive "WBS Activator"
system component for drying acceleration
For all water-dilutable 1- and 2-component paints. Can be used to shorten the drying times when painting at reduced ambient temperatures. VOC, free of glycols, heavy metals and alkylphenol ethoxylates (APEO).
Note from the manufacturer: Mipa WBS accelerator can be used either in mixture or instead of deionized water for viscosity adjustment. The higher the proportion of WBS accelerator is chosen, the faster the drying will be accelerated. The acceleration of the drying is much stronger than the acceleration of through-drying. As a rule, using Mipa WBS accelerator instead of demineralised water halves the drying time.
MIPA Cleaner "WBS gun cleaner"
cleaning agents for water-based paints (Mipa WBS, Mipa WBC) contaminated spray guns
Application: Pre-clean the spray gun with water, then rinse with the gun cleaner and finally rinse again with the cleaner. Note on preparation: the resulting washing water can be treated with Mipa WBS coagulating agents to reduce the amount of waste water and used again for pre-cleaning
