Ø 150mm, hook and loop, 15 holes, basis
for orbital sander, for feather edging, stripping old paint and dry sanding filler. With premium aluminium oxide grain on a durable B-weight latex paper backing, with non-loading No-Fil water-based stearate

max. 13.300 rpm, 80 m/s, sharp aluminium oxide
for hand-held machines, for cutting steel and stainless steel, iron-, sulphur- and chlorine-free

HSS-CO, type N, with 5% cobalt, DIN 338
Cylindrical, short, right, polished, tips from 3mm split point, sharpening angle 135°. Suitable for alloyed and unalloyed steels (700 - 1300 N/ mm²),hot and cold work steels, tempering and case-hardening steels and stainless and acid resistant steels

standard, 230 x 280mm, manual sanding
flexible J-cloth backing, alumina abrasive grit, suitable for iron and non-ferrous metals, paints, varnishes, hard and soft wood

radial disc, round, Ø 90mm, neutral color
For removing residues from painted surfaces, e.g. stickers, paint residues as well as adhesive residues from type plates or adhesive weights during wheel balancing. Thread mount 5/16" x 24 (13mm long), disc Ø 90 x 15mm thick, incl. adapter with 6mm mandrel, 18mm long (40mm total)

HSS-TIN, type N, titanium coating, DIN 338
cylindrical, short, right, sharpened, titanium coating, from Ø 3mm cross-grinding, sharpening angle: 135°. Suitable for steel, cast steel alloyed and unalloyed ( lower as 900 N/mm²), grey and die-cast, sintered iron, graphite, short-chipping aluminum alloys, brass and bronze

115 x 280mm, non-punched, can be used by hand or on orbital sanders
For dry sanding primer, filler and old paint. Plan grinding of polyester filling areas as well as grinding / shaping of fillers. The special anti-setting coating No-Fil prevents premature clogging and extends the life usage

Ø 75mm, presses compact disc, quick-change system TR
For very fine grinding and deburring, reduces the surface roughness on all materials, suitable for the preparation of polishing metals, finishing and cleaning of body and engine parts

Steel, straight version, for hand-held angle grinders, hard
Thin cutting discs for processing stainless, thin-walled materials such as tubes, sheet metal, profiles, wires, etc., as well as for general metalworking. Free of iron, sulphur and chlorine (Fe + S + Cl ≤ 0.1 %), maximum working speed: 80 m/s

HSS-R, type N, roll-milled, DIN 338, black
Cylindrical, short, right, standard , sharpening angle 118°. Suitable for steel, cast iron alloyed and unalloyed ( lower as 900 N/ mm²), grey and pressure casting, sintered iron, graphite, short-chip aluminium alloys, suitable for brass and bronze