soft PVC, transparent, without fabric insert, flame retardant and self-extinguishing after removal of the flame
Can be used as a fuel hose for small engines and lawn mowers as well as windscreen washer hose (with ethylene glycol addition). The hose is silicone-free and fulfills the requirements of 202/95/EC (RoHS) and the 1907/2006/EC (REACH).

type 2 A, E10, smooth, with braided textile interlining, according to DIN 73379/ 1997
Pressure tube for the support of containing of lead/unleaded fuels and diesels, but not for biodiesel. Additives of biodiesel or additive of bioethanol (ETBE till max 7 till 10%)

Technical data: inner tube: NBR compound, fuel and oil resistant (nitrile rubber), insert: textile braid (CV/ viscose), outer layer: CR-compound (chloroprene rubber), color/marking: black/label DIN standard, temperature resistance: constant temperature -35 till 90°C, peak temperature: short-term till 110°C; coldness behavior: filled with FAM-test fuel and 180° bending till -35°C, (not for hoses with > 15mm outer diameter), test pressure (tightness): air: 4 bar over 60 seconds, water: 20 bar over 30 till 40 seconds, working pressure: < 10 bar, burst pressure: according to DIN 53758, tolerances: according to EN/ ISO 1307/97

universal, 1m long, for cooling systems in vehicles and stationary systems
smooth, black inner layer, temperature resistant from EPDM (nitrosamine-free rubber compound. Insert made of textile threads, outer layer is blac, smooth, heat and weathering and aging resistant from EPDM (nitrosamine-free rubber compound. Working temperature from -40°C to +100°C, working pressure 3 bar, burst pressure value 3:1, tolerances inner Ø lower as 22mm according to UNI EN ISO 1307, inner Ø higher as 22mm according to RMA steel mandrel

type B, E10, vulcanized textile braids, not only suitable for biodiesel and biodiesel additive
connecting and vacuum hose, NBR compound hose core, cotton mesh from CO (cotton), color: black

Technical data: temperature resistant: permanent tepmerature from -35°C to 90°C, short-term peak temperature till 110°C, working pressure: up to 10 bar; burst pressure: according to DIN 53758, tolerancy: according to EN / ISO 1307/97

low-pressure hose fittings, for pressing the hose and fitting to the hose ends

top rubber with textile insert
repair / gasoline hose according to DIN 73379, black, on spool in carton or polybag, various Ø and lengths
Note: Not suitable for biodiesel and rapeseed oil!

for exhaust tester, DIN 4798, type C, pressureless
usable as connecting and vacuum hose, Vacuum hose for control purposes in motor vehicles and as a fuel hose for two-wheeled vehicles. May be installed in the tank according to the manufacturer, NBR hose core, color: black, temperature resistant till 70°C (short-term till 90°C)
Note: Not suitable for biodiesel and rapeseed oil!

assortment, 90 pieces, plastic

consisting of:
connecting nozzles (straight): Ø 3, 4, 5, 6mm
reduction nozzles (straight): Ø 4-3, 6-4, 8-4, 8-6mm
T-nozzles: Ø 3, 4, 5, 6mm
Y-nozzles: Ø 4, 5, 6mm
T-reduction nozzles: Ø 3-4-3/4-6-4mm
Y-reduction nozzles: Ø 4-6-4mm

for washing water pipes, 159 pieces, sorted
for repair of shaft pipes with a nominal diameter of 4,5mm, with mounting clips and sealings in three different diameters and a 2,5m long shaft pipe. By means of connection adapters it is also possible to repair defective points in the case of wash water pipes with hose Ø 3/4mm. Furthermore, hose connectors are included for the direct connection of rubber hoses

Consisting of: 10x adapters for 3mm hose line, 10x adapters for 4mm hose line, 6x connecting/distributor for pipe lines NS 4,5 for 3mm, 6x connecting/distributor for pipe lines NS 4,5 for 4mm, each 30x seal ring Ø 5 - 5,5 - 6mm, 28x clip NS 4,5mm, 8x connecting/distributor for pipe lines NS 4,5mm, 2,5m shaft pipe NS 4,5mm

for pressure sensor hose, high temperature resistant, marten bite protective hoses
For repair of defective connection hoses between diesel particulate filter (DPF) and differential pressure sensor. Braid-wrapped pressure pipes made of silicone, very flexible. Can be bent according to the damage problem and easily shortened. The included spring band clamps are designed for the diameters of the pressure and protective hoses