The shaft sealing rings have 3 sealing lips, which balance the sealing pressure, reduce the resistance and thus provide a better breakaway torque and less wear. This achieves a 3-4 times longer service life than with OE-simmerrings. Dimension informations (mm): inner diameter x outer diameter x installation height/total height

A special grease layer improves the breakaway torque and reduces friction. Measurement information (mm): inner diameter x outer diameter x installation height/total height

Original equipment quality, dirt and insects that cling to the stanchions can damage the fork simmerrings over time. The result: dangerous oil leaks and poor damping. Therefore, replace leaking rings with new ones in good time. Each unit ordered consists of 2 branded fork seals for replacement on both stanchions!

self-service package, pair, Ø 34/37mm, min. length: 200mm, max. length: 350mm, delivery with mounting material

High quality NTK shaft seal rings in OEM quality. Due to the special XNBR material they are especially resistant to abrasion and high temperatures. Measurement information (mm): inner diameter x outer diameter x installation height/total height

Carboxyl group-containing nitrile rubbers (XNBR) are improved versions of the NBR types which combine the technical properties of nitrile butadiene rubber (NBR) with increased wear resistance

Identical with the original. Made in Japan, dimensions (mm): outer diameter x thickness

Each set was tested with 500,000 shocks loading. The test results show a much lower wear than the OE parts used by the manufacturers. That is why these fork repair kits are not only simple spare parts, but are also used for performance optimization on racing circuits in the enduro and road areas due to the higher load carrying capacity.
Set contains: slide bushings, seal rings, circlips
Set not includes fork oil-seal ring and dust caps

SB-packed, pair, Ø 42/45 - 60 mm, minimum length: 200 mm, maximum length: 350 mm, supplied with fixing material.

made in Japan, dimensions in mm: inner diameter x outer diameter x installation height/total height