ARIETE Fuel Hose
double-walled, roll with 10m, suitable for E10, purple, made in Italy
ARIETE Fuel Hose
single-walled, roll with 10m, suitable for unleaded petrol, grey, made in Italy
ARIETE Fuel Hose
single-walled, green, made in Italy
ABS STUTE Fuel Hose
type B, E10, vulcanized textile braids, not only suitable for biodiesel and biodiesel additive
connecting and vacuum hose, NBR compound hose core, cotton mesh from CO (cotton), color: black
Technical data: temperature resistant: permanent tepmerature from -35°C to 90°C, short-term peak temperature till 110°C, working pressure: up to 10 bar; burst pressure: according to DIN 53758, tolerancy: according to EN / ISO 1307/97
ARIETE bleed hose
for carburetor, roll with 10m
CIF Hose Clamp
zinced
DRESSELHAUS fuel hose "4715"
top rubber with textile insert
repair / gasoline hose according to DIN 73379, black, on spool in carton or polybag, various Ø and lengths
Note: Not suitable for biodiesel and rapeseed oil!
DRESSELHAUS vacuum hose "4716"
for exhaust tester, DIN 4798, type C, pressureless
usable as connecting and vacuum hose, Vacuum hose for control purposes in motor vehicles and as a fuel hose for two-wheeled vehicles. May be installed in the tank according to the manufacturer, NBR hose core, color: black, temperature resistant till 70°C (short-term till 90°C)
Note: Not suitable for biodiesel and rapeseed oil!
5,0 x 10,0 x 2,2mm (20m coil in carton)
- Article number: 42627059
- Original number: 471600006 5x10x2,5
3,5 x 8,0 x 2,25mm (20m coil in carton)
- Article number: 42627034
- Original number: 471600006 3,5x8x2,25
DRESSELHAUS hose connector
assortment, 90 pieces, plastic
consisting of:
connecting nozzles (straight): Ø 3, 4, 5, 6mm
reduction nozzles (straight): Ø 4-3, 6-4, 8-4, 8-6mm
T-nozzles: Ø 3, 4, 5, 6mm
Y-nozzles: Ø 4, 5, 6mm
T-reduction nozzles: Ø 3-4-3/4-6-4mm
Y-reduction nozzles: Ø 4-6-4mm
