liquid fast-acting degreaser based on hydrocarbon, acetone-free
For maintenance, repair and installation. For degreasing and activating parts before gluing and painting. Removes oils, hard crusts, synthetic oil and silicone residues. Recommended for residue-free cleaning. Contains no aromatic or halogenated hydrocarbons.

multifunctional product, rust remover, lubricant, contact spray, cleaner, corrosion protection
Protects metal against rust and corrosion, penetrates to jammed parts, displaces moisture and lubricates almost everything. It removes grease, soot and other dirt from surfaces. Suitable for garden tools and devices, battery connections, bicycle frames, door locks and hinges, electric tools, motors, alloys and exhaust systems.

approvals: API GL4

2-stroke, semi synthetic
Specially developed for the lubrication of air and water-cooled 2-stroke scooters with very high speeds and / or heavy to heaviest load.Suitable for engines with separate and mixed lubrication. Please, follow the regulations of the engine manufacturer. Specifications and approvals: API TC (TSC-3), JASO FC/FD, ISO-L-EGD (Low Smoke)
MADE IN GERMANY - FILLED IN HOYA
SPEC-X Lubricants are made exclusively from high quality first refinements and special additives.

10W-40, 4-stroke, semi-synthetic
Designed for use in 4-stroke motorcycles with wet running oil bath clutches. It is suitable for all motorcycles with common oil circuit of the engine, clutch and gearbox and achieves by its increased friction value requirements of the JASO MA2 also an excellent clutch performance. Provides excellent corrosion and wear protection of the engine and transmission, as well as a high oxidation protection by the selected lubricant for this semi synthetic base oils. Specifications and approvals: API SL, JASO MA-2
MADE IN GERMANY - FILLED IN HOYA
SPEC-X Lubricants are made exclusively from high quality first refinements and special additives.

With a special gel formula for the effective cleaning of metal, paint and plastic surfaces with low environmental impact and good compatibility of the surfaces.
Do not use on hot surfaces or in the blazing sun. Do not allow the product to dry. In the case of repainted surfaces, the material compatibility must be checked in a concealed place before applying the cleaner.

white, adhesive resistant lubricant for mechanical parts made of metal and plastic to prevent the friction. Applications: roller and ball bearings, shift, throttle and clutch rods, hand brake parts, joints, door locks, springs, sunroofs

exceeds international standards and the legal specifications, dry boiling point: 270°C, wet boiling point: 163°C

2-stroke, semi synthetic
Specially developed for the lubrication of air- and water-cooled two-stroke motorcycles with very high speeds and / or heavier till heaviest loads and engines with separate and mixed lubrication. Designed for a mixing ratio of 1:50 and suitable for engines with separate and mixed lubrication. Please, follow the regulations of the engine manufacturer. Specifications and approvals: API TC (TSC-3), JASO FC/FD, ISO-L-EGD (Low Smoke)
MADE IN GERMANY - FILLED IN HOYA
SPEC-X Lubricants are made exclusively from high quality first refinements and special additives.

Transparent chain spray, suitable for all drive chains with O-, W-, X- and Z-rings and high rotational speeds. Penetrates all lubrication points due to its low viscosity and good wetting properties. After evaporation of the solvent, a spin-resistant, transparent, water-resistant and pressure-resistant lubricating film remains. Special additives reduce friction, wear and corrosion.