BIKESERVICE Nut Wrench
4 pin, 24mm inside Ø. For easy loosening and tightening of locknuts. Wrench with 3/8" drive for ratchet use, made of hardened steel
BIKESERVICE Nut Wrench
For easy loosening and tightening of locknuts and through the long shaft suitable for the locknut of the starter freewheel. Wrench with 3/8" drive for ratchet use. Dimensions data: outer Ø. Material: hardened steel
27mm, 4 pin
technical data:
outer Ø: 31mm
inner Ø: 23mm
pin Ø: 4mm
- Article number: 05770706
- Original number: BS4019
BIKESERVICE Nut Wrench
For easy loosening and tightening of locknuts. Wrench with outer hexagon (SW 22) and 3/8" drive for ratchet use. Dimensions data: outer Ø. Material: hardened steel
44mm, 6 pin
technical data:
inner Ø: 38mm
pin Ø: 4,5mm
- Article number: 05770599
- Original number: BS4010
47mm, 6 pin
technical data:
inner Ø: 41mm
pin Ø: 4,5mm
- Article number: 05770607
- Original number: BS4011
BIKESERVICE Nut Wrench
For easy loosening and tightening of locknuts. Wrench with outer hexagon (SW 19) and 1/2" drive for ratchet use. Dimensions data: 18mm inner Ø, 24mm outer Ø. Material: hardened steel
BIKESERVICE Nut Wrench
For easy loosening and tightening of nuts. The tool can be used with a spanner (SW 24) and 1/2" drive reversible ratchet. Material: hardened steel
24mm inner Ø, 29mm outer Ø, 4-pins, pin width: 5,4mm
- Article number: 05772454
- Original number: BS3003
21mm inner Ø, 28mm outer Ø, 4-pins, pin width: 5,6mm
- Article number: 05772447
- Original number: BS3001
BIKESERVICE Nut Wrench
For turning the crankshaft and holding tool of gauge discs for Ducati models. Wrench with outer hexagon for ring spanner (SW 17). The special tool is fixed on the crankshaft with a hexagon socket screw (6mm). After fixing, the crankshaft can be turned with a ring spanner. Dimensions: outer Ø. Material: hardened steel
17mm, 2 pins
technical data:
inner Ø: 12mm
pin width: 4mm
threaded screw: M8 x 1.25
- Article number: 05770755
- Original number: BS23050
BIKESERVICE Nut Wrench
For easy loosening and tightening of locknuts. Wrench with outer hexagon (SW 22) and 13/8" drive for ratchet use. Dimensions data: outer Ø. Material: hardened steel
36mm, 4 pin, with recess
technical data:
outer Ø: 40mm
inner Ø: 32mm
pin Ø: 4mm
recess size (B): 12mm
- Article number: 05770581
- Original number: BS4018
40mm, 4 pin, with recess
technical data:
outer Ø: 43mm
inner Ø: 37mm
pin Ø: 3,5mm
recess size (B): 12mm
- Article number: 05770573
- Original number: BS4009
42mm, 4 pin
technical data:
outer Ø: 47mm
inner Ø: 37mm
pin Ø: 5mm
- Article number: 05770565
- Original number: BS4008
BIKESERVICE Nut Wrench
For easy loosening and tightening of locknuts. Wrench with 1/2" drive for ratchet use and 1/2" extension (length: 76mm). Dimensions data: outer Ø. Material: hardened steel
25mm / 30mm, 4 pin
technical data:
inner Ø: 20,5/24,5mm
pin Ø: 5,3/5,3mm
- Article number: 05770722
- Original number: BS3000
32mm / 36mm, 4 pin
technical data:
inner Ø: 26,5/30,5mm
pin Ø: 5,3/5,3mm
- Article number: 05770730
- Original number: BS3008
BIKESERVICE Nut Wrench
For turning the crankshaft and holding tool of gauge discs for Ducati models. Wrench with outer hexagon for ring spanner (SW 17). The special tool is fixed on the crankshaft with a hexagon socket screw (6mm). After fixing, the crankshaft can be turned with a ring spanner. Dimensions: outer Ø. Material: hardened steel
20,5mm, 2 pins
technical data:
inner Ø: 15mm
pin width: 3,5mm
threaded screw: M6 x 1.0
- Article number: 05770748
- Original number: BS30010
BIKESERVICE Nut Wrench
For easy loosening and tightening of locknuts and through the long shaft suitable for the locknut of the starter freewheel. Wrench with outer hexagon (SW 27) and 1/2" drive for ratchet use. Dimensions data: outer Ø. Material: hardened steel
40mm, 4 pin
technical data:
total length: 90mm
inner Ø: 32mm
pin Ø: 5,8mm
- Article number: 05770789
- Original number: BS2493