Suitable for parts washers, from perbunan, Ø10 x 2mm

special brush, special design for IBS parts cleaning devices

part washing device, pump with 3,3l/min delivery rate, only suitable for non-flammable liquids
For thorough cleaning and degreasing of complex parts before soldering or painting. Through a flexible metal hose the parts are specifically cleaned. Input power: 0,026 kW, supply voltage: 230 V, mains frequency: 50 Hz, connecting cable length: 1,5m

Spare parts package for IBS parts cleaning devices
The spare parts package contains the most common wearing parts that are necessary for the smooth operation of your parts cleaning machine. The original spare parts are perfectly matched to the IBS devices and guarantee optimum function.

Consisting of: 1x each standard Cleaning Brush (fine bristles 0.3 mm, coarse bristles 0.5 mm), return hose NW 20, brush hose (1.5 m), hose clamp (small) 8-16/9 (suitable for all pump sets), hose clamp (large) 16-25/9 (suitable for all pump sets; except type K, type A, W series).

capacity: 50kg, container size: max. 50l, working height: 820mm
For manual cleaning of greasy components made of metal and plastic as well as for surface degreasing. Robust, stable workshop design with foot switch and pump. Device outer dimensions (WxHxD): 656 x 465 x 1005mm, working surface (inner dimensions): 646 x 465mm, connection: 230V / 50 Hz, weight (without drum): 15kg

mobile, for mobile use, for the cleaning of greasy plastic and metal components
with large working surface and high capacity, ideal for everyday use in any repair and maintenance workshop, easy moving because of handcart design
Technical data: capacity: 100kg, container size: max. 50l, working height: 920mm, working area (inner dimensions): 790 x 490mm, power supply (electrical): 230 / 50V/Hz, dimensions (LxWxH): 800 x 615 x 1120mm, weight (without drum): 43kg

Function: Pressing the foot switch and cleaning the soiled parts with the brush the soiled liquid flows back into the drum, separates itself and the soil falls down to the bottom. At the same time the pump pumps fresh cleaning agent from the middle of the drum. An extended service life is ensured. The drum with the dirty liquid is simply replaced.

load: 50kg, max. container size: 50l, working height: 895mm, closed workshop design
For manual cleaning of greasy components made of metal and plastic, as well as for surface degreasing. Robust, stable design with foot switch and pump. Outer dimensions (WxHxD): 656 x 1075 x 475mm, work surface (inner dimensions): 646 x 465mm, connection: 230V / 50 Hz, weight (without reservoir): 25kg

Parts washer for small parts, stainless steel, 90l
For thorough cleaning of components with hot water and biodegradable detergent. At working temperatures between 60 - 70°C for thermal dirt solution, spray jet for mechanical dirt dissolver, rotatable washing basket for all-round action, integrated oil skimmer, timer and water level control through a sensor in the safety area of the tank (the washing process will interrupted in case of water shortage to prevent running dry and overheating). Also suitable for demineralized water.

Technical data:
plunge basin / basket content: 90l
plunge basin / basket diameter: 780mm
load: 150kg
temperature (min. - max.): 0 - 70°C
washing time: 0 - 60 min
drive power: 4,7 kW
colour: silver
weight: 80kg
width: 900mm
depth: 1050mm
height: 1130mm
material: stainless steel
drive voltage (electric): 230 - 400V / 50 Hz