for high frequency chargers with central plug Comfort Connect, 12V
Suitable for: XC 0.8, XS 0.8, MXS 3.8, MXS 5.0, MXS 5.0 Test & Charge, MXS 5.0 Polar, Lithium XS, MXS 7.0 and MXS 10

for 12V batteries from 1,2 to 110 Ah, suitable for cold enviroments
For automatic, 8-stage charge / charge maintenance of open, MTF, AGM, GEL and lead-calcium batteries. Possible regeneration of deep discharged batteries, With desulfation function. Temperature compensated, electronics, protection class IP65 (splashwater and dustproof).

Technical data:
power supply: 220 - 240V AC / 50 - 60 Hz
charging voltage: 14,4 / 14,7 / 15,8V
charging current: max. 5A
battery capacity: 1,2 - 110 Ah charging / 1,2 - 160 Ah receive
charging time: 12 hrs.(with a 60 Ah battery)
weight: 0,6kg

for 12V batteries from 14 to 150 Ah
For charging larger batteries in caravans, campers, boats and motor vehicles. Full autamatic 8-stages charger with charging current of 7A for 12 V batteries between 14 Ah and 150 Ah and for the maintenance of batteries up to225 Ah. It has a battery diagnosis that determines if the battery can receceive and retain a charge, a special Recond mode for reconditioning deeply discharged batteries where you could except a stratified acid,a winter program for the charging in cold environments, as well as an option for AGM batteries. Can also be used as a power source to supply 12V devices up to 7A.

Technical data:
battery types: all typesof lead-acid batteries, wet, MTF, Ca/Ca, AGM, GEL
power supply: 220 - 240V AC / 50 - 60 Hz
start voltage: 2,0V
charging voltage: 13,6 / 14,4 / 14,7 / 15,8V
charging current: max. 7A
battery capacity: 14 - 150 Ah charging / 14 - 225 Ah receive
weight: 0,8kg

for 12V batteries from 20 to 300 Ah
Automatic, 8-stages charging/charge retention of open, MTF, AGM, GEL, EFB and lead-calcium batteries. Possible regeneration of discharged batteries, desulfation function avaliable. Temperature-compansated, electronics safe, with supply mode (the device can be used as a power supply when the battery is removed) and visualization of charging process.

Technical data:
power supply: 220 - 240V AC / 50 - 60 Hz
charging voltage: 13,6 / 14,4 / 14,7 / 15,8V, nominal 12V
charging current: max. 10A
protection class: IP65 (splash and dustproof)
battery capacity: 20 - 300 Ah
charging time: 6 hrs. by 60 Ah battery
weight: 0,85kg

for 12V batteries, 40 to 500 Ah, charging current: 25A, charging cable: 6m, incl. wall-mount device and bracket
Portable, flexible or firmly installed on pillars or work bays. For fully automatic charging of 12V batteries of all kind (wet cells, Ca/Ca, gel, AGM, EFB and Lithium-Ion (LiFePO4, Li-Fe, Li-iron, LFP) and to support the battery during diagnostics and troubleshooting. Spark-proof, protected against polarity reversal, with integrated safety functions and temperature sensor and a special re-conditioning program to restore discharged and overtaking exhausted batteries. Acc. to IP44 certified for outdoor use.

Technical data:
input: 220 - 240V (AC), 50 - 60 Hz, 2.9 A max.
output: 14.4V / 15.8V / 13.6V, 25 A max. (lead batteries), 13.8V / 14.4V / 13.3V, 25 A max. (LiFePO4 batteries)
battery power: 40 - 500 Ah (lead batteries), 30 - 450 Ah (LiFePO4 batteries)
start voltage: 2.0V
ripple: less than 4%
charging / supply cable length: 6000mm (DC) / 1900mm (AC)
ambient temperature: -20 to +50°C
temperature compensation: via connected axternal voltage temperature compensation sensor

for 12V batteries from 40 to 500 Ah, charging current: 25A
For fully automatic charging of 12V batteries of all sorts (wet cells, Ca/Ca, gel, AGM, EFB and lithium-ion (LiFePO4) and to support the battery during diagnostics and troubleshooting. Non-sparking, protected against polarity reversal, with integrated safety functions and temperature sensor and aslo a special reconditioning program for restoring discharged and overtaking exhausted batteries. According to IP44 certified for outdoor use.

Technical data:
input: 220 - 240 V AC, 50 - 60 Hz, 2.9 A max.
output: 14.4V / 15.8V / 13.6V, 25 A max. (lead batteries), 13.8V / 14.4V / 13.3V, 25A max. (LiFePO4 batteries)
battery power: 40 - 500 Ah (lead batteries), 30 - 450 Ah (LiFePO4 batteries)
start voltage: 2.0V
ripple: less as 4%
charging/power cable length: 2000mm (DC) / 1900mm (AC)
ambient temperature: -20 to +50°C

12V, starter and state of charge tester
Automatic, for lead and gel batteries, with insulated charging clamps and integrated cable tray compartment. Floating mode allow 100% charging, polarity protection with warning signal and various safety devices. 230V, 50/60Hz, 2 charging stages, with WU characteristic, dimensions (LxWxH): 165 x 110 x 290mm

6-12V, 230V, 50/60 Hz, with IwUoU chracteristic
Microprocessor controlled, for gel, AGM, VRLA and liquid batteries.The models with 15A have a 24 hour regeneration program to restore deep discharge and partially sulfated batteries. The charge can be carried out without disconnecting the battery - protection against polarity and short circuit. If the terminals are not connected, no charging voltage is generated

multi pocket booster, lithium battery, 2,5 Ah, with flashlight function
Suitable for starting discharged 12V vehicle batteries, powering or charging most laptops and powering all common electrical devices. With 2 USB ports (5V / 9V / 12V - 2A / 5V - 2A for charging smartphone, tablet, navigation system, etc., Thermal protection, LED light with 3 lighting modes and LCD screen to display the charge level of the internal battery in %. Incl. accessories (jumper cable, USB cable with multisocket, adapter for cigarette connection and charging cable and cover.
Technical data: starting current: 12V / 350A, peak current: 12V / 900A, connectors: 2 USB ports (5V / 9V / 12V - 2A / 5V - 2A, charging time: 5 hrs., dimensions: 146 x 78 x 31mm

microprocessor controlled automatic multiple charging station for up to four 12V batteries from 10 to 100Ah, charging current 4x 5 A
Charges all lead batteries (with gel or a wet electrolyte) to 100% in 5 charging stages (pulse / fast charge / 100% / equalization / charge maintenance). With 4 pairs of disconnectable terminals, inverter technology, charge retention function and indicator lights that show the status of charging for each battery. Voltage-free terminals when no battery is connected, protection against overload, against short circuits, against reverse polarity and anti-spark system.