piezo ignition, working temperature: 1300°C
For rapid heating up e.g. when soldering, shrinking or flambé. With lockable on/off switch and adjustable flame size. Filling with conventional butane gas for the lighters.

electro tin, 60% tin content
Flux-filled soft solder iwre, ISO Core "RA" S-Sn60Pb40 according to DIN En 29453 (early designation L-PbSn60 according to DIN 1707), fkux amount: 2,5%, 1.1.2.B according to DIN EN 29454 (early flux designation F-SW 26), for fine soldering, plumbing, telecommunication construction, general soldering operations, melting range: 183 - 190°C. The flux is conductively!
Note: Only for professional users!

electro, 40% tin content
Flux-filled soft solder wire, ISO Core "KOLO" S-Sb60Sn40 according to DIN EN 29453 (early designation L-PbSn40 according to DIN 1707), flux amount: 3,5%, 1.1.1.B according to DIN EN 29454 (early flux designation F-SW 31), for fine soldering, plumbing, telecommunication construction, general soldering work, melting range: 183 - 235°C. The flux is non-conductive and is more strongly activated on a halogen basis!
Note: Fpr professional users only!

DIN851, EN29454-1
Flux for general soft soldering of copper alloys, not suitable for soldering in electronics!

for soldering, de-soldering, brazing, heating and tinning
Individually controllable gas and air supply. Super fine flame shape with temperature attaining 1200°C. Ideal for precision work. Fitted with an electronic piezo crystal lighter. Tank capacity: 50ml for approx. 60 minutes operating time with normal flame. For fill-up use standard butane cartridges for lighters

For working with open flame or with catalyst unit in combination with adapters for soldering, hot-cutting, woodburning and shrinking of insulating sleeves. Also for retouching surface imperfections in wood (cracks, dents)
Electronic piezo crystal lighter with safe on/off gas flow switch. Individually controllable gas and air supply. Hard soldering of delicate parts with flame temperature up to 1.300°C. When working with tips up to 500°C. Relatively large gas tank (20ml) for long continuous work. Refillable with standard butane cartridges for lighters. Adapter tips: large wax/varnish scraping knife, hot knife for cutting even thicker plastic foil, 2 wood burning tips (angled and flat pointed), a soldering tip, a round nozzle for hot air work and heat-shrinking sleeves
Also included: soldering tin, drip tray with sponge and 7mm open-end spanner for tightening the adapter tips. Stainless steel base also enables stationary work

piezo ignition, till 1750°C, working temperature approx. 730°C, incl. 400ml gas cartridge
Hand burner for tinning, flaming, soft and hard soldering. The high performance special burner (Ø 17mm) bundles the flame, thus saves energy and reduces the work time. With ergonomic handle, adjusting wheel for flame regulation and ignition button.

piezo ignition, overhead valve, working temperature approx. 730°C, without gas cartridge
Blow torch soldering as well as for various brazing and heating, tinning, flaming and melting. By the overhead valve, the blow torch can be tilted forward by 90° directly after start-up or turned 180° upside down. This valve allows overhead work without corresponding preheating time and keeps the prevailing gas pressure constant at the nozzle. Flame infinitely adjustable, the ignition is quick and easy by pressing a button and the stable, ergonomically shaped handle allows safe and comfortable one-hand operation.

cutting length: 35cm, groove width: 1,1mm
Chain for saw bars with a length of 35cm, a bar groove width of 1.1mm and a 3/8" pitch. With the double cutting corners on the "Chamfer" - half chisel cutting edges and the 3/8" - pitch, the chain produces a rough cutting pattern, is durable and quite easy to file. Suitable for e.g. Makita chainsaw "EA3200S35A" and "UC3541A".

Piezo ignition, up to 1300°C, 10 pieces
For fine working, gas supply totally adjustable, filled with standard lighter gas/ISO butan gas
Consisting of: soldering iron, soldering head for screwed-in soldering tips, soldering tip 3,5mm (chisel), soldering tip 4,5mm (diagonal), soldering tip knife, flame adapter, solder sponge, solder wire feed, protective cap, additional housing