relief-milled guide flutes, fluted lay-on slip joint, jaws induction hardened, chromed surface, DIN ISO 8976

pliers and wrench in one, patented
The new generation of water pump pliers, for easier working; box joint; fast and precise adjustment by push of a button directly on the workpiece; no unintentional adjustment; one-hand adjustment; non-slip handle; clamp protection prevents squeeze injuries; hardened theeth approx. 62 HRC; self-locking on tube and nuts; no slipping at the workpiece; chrome-vanadium-electric steel, oil-hardened; polished head; plastic coated grips, DIN ISO 8976 (old DIN 5231 D)

pliers and wrench in one tool
Excellent for gripping, holding, pressing and bending workpieces, also for gentle assembly, flexible adjustment of all key widths up to the specified capacity using parallel-guided baking, the ratchet type principle allows quick and easy tightening and release of all bolted connections

Manufacturer note:
If necessary, the smooth jaws grasp all parallel surfaces in the capacity range with high pressure and open up almost unlimited application possibilities for the pliers wrench: e.g. for counter-screws, presses for activating the adhesive force of contact adhesives, edge breaking in tile work, cracking of cable ties, use as a small vise

box joint, teeth hardness approx. 61 HRC, notch adjustment
Slim size of head and joint area, self-locking on pipes and nuts, gripping surfaces with special hardened teeth. Insensitive to dirt, particularly suitable for outdoor work, with guard. Chrome-vanadium electric steel, forged, multistage oil hardened, pliers black atramentized, plished head, handle with anti-slip plastic coating, DIN ISO 8976.

for metric and imperial nuts and screws with widths across flats from 10 to 32mm (3/8" up to 1 1/4"), adjustment positions: 15, pipe width: 3/8" - 1 1/4"
Self-locking from 17 mm, replaces a set of wrenches. Reliable and tight gripping of rounded, rusty, or thick coated bolts and screws. Quick tightening of bolted connections using ratchet action. Box joint, guard, push the button for adjustment on the workpiece, also possible with one hand only. Chrome-vanadium electric steel, forged, multistage oil hardened, pliers grey atramentized, polished head, handles with non-slip plastic coating

Swedish pattern, 45° angled jaws
Jaws with offset teeth in opposite direction, teeth additionally induction hardened, double T-profile rubber, captive adjusting nut, chrome-vanadium electric steel, forged, multistage oil hardened, red powder coated, jaws bright ground, DIN 5234

with groove joint and milled tongue, teeth hardness approx. 56 HRC
Self-locking on pipes and nuts (no slipping on the workpiece), jaw profile designed to fit screws and nuts, gripping surfaces with special hardened teeth, chrome-vanadium electric steel, forged, multistage oil hardened, pliers black atramentized, polished head, handles with plastic coating

automatic adjustment per one-hand operation, for right- and left-handed use
Ideal for frequent changeovers to workpieces of different sizes. Self-locking on pipes and nuts, slim dimensions of head and joint area, flush joint bolt. Box joint, guard and locking lever. Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC, chrome-vanadium electric steel, forged, multistage oil hardened, pliers grey atramentized, polished head, handles with non-slip plastic coating, DIN ISO 8976.

Attention: The adjustment process for adaptation to the workpiece is done automatically! Lay the pliers, squeeze the handles, ready!

pipe pliers and wrench in one, with additional sliding function
Combines the proven, reliable locking of the hinge bolt with an additional push function which makes it easier to work in very confined and inaccessible areas. Reliable locking of the hinge bolt with the first workload. The gripping width of the pliers is then fixed and can only be adjusted by pressing the button. To re-activate the sliding function, the hinge bolt must be released by pressing the push button and the pliers must be completely opened again. An accidental adjustment is excluded. The adjustment directly on the workpiece is possible by simply sliding the pliers handle. Box joint, chrome-vanadium electric steel, oil hardened, pliers grey atramnetized, polished headt, handles with non-slip plastic grips, DIN ISO 8976 (old DIN 5231 D).

for siphons, tube fittings and connectors up to Ø 80mm, black atramentized, handles with non-slip plastic coating
Ideal for tightening and loosening siphon screw connections, plastic pipe fittings and round union nuts. For connectors and couplings with screw connection, such as Cannon circular connectors. For gentle loosening of hoses on nozzles. Fine adjustment for ideal adjustment to diverse diameters, robust and heavy duty. 25 adjustment positions, box-joint design. Ergonomic handle geometry, chrome-vanadium electric steel, forged, oil hardened. Working capacity Ø 25 - 80mm, weight: 355g