star, 1/4", outside hexagon drive, length: 25mm

1/4", star profile, 6-point drive, length: 25mm, 3 pieces
specially hardened material, optimized torsion zone, for manual and machine operation (also for impact wrenches), colour coding on the bit, hexagon drive ISO 1173 C6.3 (1/4″)

star, 1/4", 6-point drive, without hole, extra hard, length: 25mm
For inside star Plus screws. Suitable for Bosch, Fein, Holz-Her, Lecreux, Metabo. High torques are transmitted through the Torx Plus profile. Compared to the "normal" Torx profile, the enlargement of the 6 torque transmitting flanks between tool and screw is realized by an elliptical and not circular profile design. This distributes the force applied when screwing over larger areas and additionally increases the service life of the screw and tool. Suitable for holders according to DIN ISO 1173-D 6,3

IPR profile, 1/4", hexagon drive, with hole, extra hard, length 25 mm
A 5-flank TORX PLUS® profile with hole. Tough and hard, for universal use. This drive geometry has been reduced by one flank and drilled to protect safety screw connections from unwanted loosening. These Screws cannot be operated with standard commercially available tools. Suitable for brackets to DIN ISO 1173-D 6.3.

1/4", with clamping ball, chrome-vanadium, chromed surface, drive: square, hollow 1/4", drive: hexagon, hollow 1/4"

1/4", combination tool consisting of ratchet, bits, sockets and a holder
Ideal for a whole host of screwdriving applications. Bit holder with Kraftform Plus handle, bit ratchet, rapid changeover from left to right direction and vice versa by using the switchover lever. Fast work possible by turning the thumbwheel (with the thumb) on the ratchet head. With ergonomic ratchet head/lever, small return angle of 6°, Rapidaptor bit holder with free-turning sleeve, ball stop groove, for hex head bolts and nuts, "Take it easy" tool finder with color coding according to size. Robust drop-forged full steel design. Torque of over 65 Nm, matt chromed, chrome-vanadium steel

consisting of:
1x bit ratchet
1x bit holder with quick change chuck
1x universal holder
1x nut adapter
each 1x external hexagon 5,5- 6,0 - 7,0 - 8,0 - 10,0 - 12,0 - 13,0
Phillips 2x PH 1 - 3x PH2 - 1x PH3
Phillips 1x PZ 1 - 3x PZ2 - 1x PZ3
each 1x Torx TX 10 - 15 - 20 - 25 - 30 - 40
each 1x Torx TX BO 10 - 15 - 20 - 25 - 30 - 40
each 1x inner hexagon 3 - 4 - 5 - 6 - 8
1x slot 5,5

star, 10mm external hexagon drive, length: 30mm
for manual, electric and impact screwdriver, suitable for screw connections in trade and industry, reinforced design, sand blasted, special steel, nickel-plated

1/4", universal, incl. ratchet, 26 pieces
Chrome-vanadium steel bits (S2 quality) with color coding for quick and easy finding of the right bit. Chrome-vanadium steel sockets, robust box with pull-out euro-hole hanger

Consisting of: 1x extension, 1x ratchet, 1x bit holder
S 2-bits, L= 25mm (18 pieces): each 1 x PH 1, PH 2, PH 3; PZ 1, PZ 2, PZ 3; H 3, H 4, H 5, H 6; T 10, T 15, T 20, T 25, T 30; SL 4, SL 5,5, SL 6,5, sockets (6 pieces): each 1x 1/4", 6mm, 7mm, 8mm, 10mm, 13mm

1/4", inside hexagon, 25mm long, special steel, suitable for electric and pneumatic screwdrivers as well for manual operation, for threaded screws (hard), permanent hardness of 59 - 61 HR C, standard: hexagon drive ISO 1173 - C 6,3 (1/4"), ISO 2351-3-C 6,3

chrome-vanadium steel (S2 quality), bits with color coding, in a robust box in special Metabo design and extendable Euro hole hanger

Attention: content/equipment see product data sheet!