6,3 (1/4 inch), hexagon, with magnet
non-slip 3-components grip allows high power transmission, grip diameter: 35,6mm, grip length: 110mm, chromed surface, length: 210mm, blade length: 100mm

1/4", with clamping ball, chrome-vanadium, chromed surface, drive: square, hollow 1/4", drive: hexagon, hollow 1/4"

quick change, magnetic, with locking device, 1/4"
For manual use, electric screwdriver and drills, bits with external hexagon drive to DIN 3126 / ISO 1173 - C 6,3, special steel

1/4", magnetic, with quick change function and locking device
Can be used by hand, electric screwdriver and drills. Ideally suited for fittings in trade and idustry, for 1/4" bits with outside hexagon adrice acc. to DIN 3126 / ISO 1173 - C 6,3 and 1/4" bit sockets with internal square drive acc. to DIN 3120 / ISO 1174

1/4", for hand operation
For secure holding of bits and screws, blade length: 125mm

1/4", magnetic, with quick change function, lock and joint, swivel angle 20°
Application: hand operating, electric screwdrivers and drills. For screwing in trade and industry by 1/4" bits with external hexagon drive according to DIN 3126 / ISO 1173 - C 6,3 and 1/4" bit sockets with internal square drive according to DIN 3120 / ISO 1174, chrome-vanadium.

extremelycompact, lightweight bike tool, two 4-way bits, three tire levers, 1/4"
Four differentn screw profiles can be operated with just one bit. The operability of the large profiles is made possible by the spring compression of the small tips. The bit with a 1/4" hexagon drive (Wera connection series 1) can also be used with e.g. bit ratchets and bitholding screwdrivers with Rapidaptor. The tire lever (#9504) has a 1/4" mounting for using a 1/4" bit. When both tire levers (#9504) are stacked together, a 4-in-1 bit can be inserted and you get a screwdriving tool. The tire lever (#9505) serves as both valve ejector and bleeder valve. The levers and 4-in-1 bits can be clipped together, so that everything is compact and nothing will be lost.

1/4", telescopic, T-grip, with magnet and stainless steel tube
For screw connections located very deep. telescopic in 10mm detent points, blade length (from grip) from 205 - 358mm, grip length: 105mm, 6-fold locking ball on the bayonet fitting, ergonomic 2-component T-grip

1/4", magnetic, DIN 7427, special tool steel
For 1/4" bits with external hexagon drive to DIN 3126 / ISO 1173 - C 6.3. Suitable for screw connections in trade and industry. Area of application: manual operation, electric screwdrivers, drills

1/4", with magnetic bit retention and stainless steel socket
For drills and cordless screwdrivers, for secure grip of bits and screws, according to DIN 7427-B, connection according to ISO 1173, drive: hexagon, burnished, chrome-vanadium, drive: hexagon, solid 1/4", drive: hexagon, hollow 1/4"