1/2", fine toothed with 72 teeth, 5° actuation angle, with locking and release mechanism, with curved shaft to protect against injury, plastic coating, DIN 3122 / ISO 3315. Material: hardened steel

1/2", fine-toothed with 36 teeth, with insert lock and release mechanism. Material: hardened steel

1/2", fine-toothed with 90 teeth, opening angle 4°
Small operating angle (4°) enables use in the tightest spaces, e.g. engines, mechanical engineering, agricultural vehicles and machinery, renewable energies (solar, wind turbines). Locking function of the lever prevents unwanted switch, VPA tested, static torque according to DIN 3122 (1000 Nm). HAZET 2-compaonent handles. With ball locking and integrated hanging possibility in the handle. Chromed surface, polished head, DIN 3122, ISO 3315

1/2", 32 teeth, with locking ball
Hazet 2-component handle, opening angle 11,25°, chromed surface, polished, DIN 3122, ISO 3315

1/2", 32 teeth, with joint
Ratchet head can be swivelled higher as 180°, Hazet 2-component handle, short design, opening angle 11,25", with locking ball, chromed surface, polished, DIN 3122, ISO 3315

1/2", fine toothed, 72 teeth, slim head
Square drive according to DIN 3120/ ISO 1174 with ball reception, reversible, 710Nm (max. load), with ejection mechanism on the ratchet head, ergonomic 2-component handle with soft zone, high gloss chromed, chrome-vanadium

1/2", fine toothed, 52 teeth, with offset screwdriver function
The perfect tool when space is a problem e.g. at heating and cooling systems, servomotors, exhaust systems and auto gearboxes. With inner square (1/4") in handle to attach e.g. an extension. Release of the application tools via pressure button

Manufacturer note: The handle can be preloaded on one side till stop by turning the handle. A few millimeters are enough to loosen and tighten.

1/2", 60 teeth, joint with ratchet mechanism, knurled ring
For effortless loosening of tightly locked screws. From CrV steel, matt chromed. Handle from oil and acid resistant TPR (thermoplastic rubber)

1/2", 52 teeth, reverse feature directly on ratchet mechanism
Quick release button for releasing sockets instantly. head and shaft forged from one piece (CrV steel, 2x nickel-plated), handle oil and acid resistant TPR (thermoplastic rubber) with useful hanging hole

1/2", fine toothed, 72 teeth, head and shaft forged from one piece
Reverse lever for ratcheting direction, quick release button for releasing sockets instantly, CrV, 2x nickel-plated, handle from oil and acid resistant TPR (thermoplastic rubber) with hole for hanging up