polished, right-hand thread
For turning out worn screws and bolts, chrome vanadium, screw M

in set, polished, right-hand thread
For extracting from demolished screws and bolts, chrome-vanadium, screw M, in plastic box

HSS G, DIN 371 / 376, metric ISO coarse thread, form B, for through-hole threads, 6H tolerance
for lightweight steels up to 1000 N/mm² stability, profile ground and flange reground

for thread cutting, with reversible ratchet head, right / left rotation, for taps

HSS DIN 352, metric ISO coarse thread acc. to DIN 13, 3 pieces
Profile ground and flange reground. For lightweight steels up to 800 N/mm² stability.
Consisting of: taper, second and bottoming

for metric fine and coarse threads, stainless steel A2, in case
Repair package with Heli-Coil made of wire with rhombic profile. Attach and screwing lke a screw, for screwing is enough to use built-in spindle, which is similar to a tap of its dimensions. Sind Durchgangsgewinde erforderlich, kann der Mitnehmerzapfen nach dem Einbau an der Kerbe (Sollbruchstelle) abgetrennt werden.
Consisting of: Helicoil plus in three lengths, spiral drill (up to M 12), hand drill tip made of HSS, built-in spindle, break-off tool (up to M12)

drill and tap, metric core hole drill, 28 pieces
hand drill tap (DIN 352): M3 x 0,5 - M4 x 0,7 - M5 x 0,8 - M6 x 1,0 - M8 x 1,25 - M10 x 1,5 - M12 x 1,75
Kernlochbohrer (DIN 338/ HSS sanded): 2,5 - 3,3 - 4,2 - 5,0 - 6,8 - 8,5 - 10,2mm
core hole drill (DIN 338/ HSS sanded): 2,5 - 3,3 - 4,2 - 5,0 - 6,8 - 8,5 - 10,2mm

for thread cutting, with ratchet

HSS DIN 352, metric ISO coarse thread acc. to DIN 13, single
Profile ground and flange reground. For lightweight steels up to 800 N/mm² stability.

HSS, taps, dies and accessories, 32 pcs.
each taper, second and finishing tap: M3, M4, M5, M6, M8, M10, M12
dies: each 1 piece 25 x 9mm, M3, M4, M5, M6, M8, M10, M12
1 tap wrench (No. 1.1/2), 1 die holder (25x 9mm), 1 screwdriver, 1 gauge