PRO Hand Tap
HSS DIN 352, metric ISO coarse thread acc. to DIN 13, single
Profile ground and flange reground. For lightweight steels up to 800 N/mm² stability.
PRO machine tap
HSS G, DIN 371 / 376, metric ISO coarse thread, form B, for through-hole threads, 6H tolerance
for lightweight steels up to 1000 N/mm² stability, profile ground and flange reground
PRO hand drill tap set
HSS DIN 352, metric ISO coarse thread acc. to DIN 13, 3 pieces
Profile ground and flange reground. For lightweight steels up to 800 N/mm² stability.
Consisting of: taper, second and bottoming
PRO Hand Drill Tap Set
HSS DIN 352, metric ISO coarse thread acc. to DIN 13, 2 pieces
Profile ground and flange reground. For lightweight steels up to 800N/mm² stability
Consisting of: tapper and bottoming
KS-TOOLS cutting tap
right-hand cutting, metric thread
DIN 352/ form B, tolerance according to ISO 2/ 6H, thread process by slicing the cutting edge, surface without discolouration, high performance cobalt steel, usable in high and low alloyed steel up to 900N/mm² stability, cast iron and NE metals
Technical data: inner hole size: 5.0mm, total length: 50.0mm, partial length: 19.0mm, cutting material: HSS Co, flute length: 31mm
KS-TOOLS Hand Drill Tap Set
HSS, metric fine thread, DIN 2181, right-hand cutting, 2 pieces
Tolerance according to ISO 2/6H, incl. cutting and threading, for running and blind hole threads, with hard metal centre, surface without discolouration, for high and low alloyed steel up to 800N/mm² stability, cast iron and non-ferrous metals
Note: second tap approx. 5 - 6 cutting gears, bottom tap approx. 2-3 cutting gears
PRO promotion package "Metallbearbeitung"
tap, countersink, die, SDS Plus drill, chisel
professional sets for drilling, tapping, countersinking, deburring, measuring and chiseling
SDS-Plus drill and chisel set
Consisting of:
SDS-Plus hammer drill bit:
5 - 6 - 8 - 10 x 110 mm
6 - 8 - 10 - 12 x 160 mm
8 - 10 x 260 mm
12 - 14 x 260 mm
Chisels:
Pointed chisel 250 mm
Flat chisel 250 mm
Chip chisel 250 mm
Power point chisel 150 mm
Power flat chisel 150 mm
- Article number: 89648448
- Original number: 2352017
PRO tap and die set
drill and tap, metric core hole drill, 28 pieces
hand drill tap (DIN 352): M3 x 0,5 - M4 x 0,7 - M5 x 0,8 - M6 x 1,0 - M8 x 1,25 - M10 x 1,5 - M12 x 1,75
Kernlochbohrer (DIN 338/ HSS sanded): 2,5 - 3,3 - 4,2 - 5,0 - 6,8 - 8,5 - 10,2mm
core hole drill (DIN 338/ HSS sanded): 2,5 - 3,3 - 4,2 - 5,0 - 6,8 - 8,5 - 10,2mm
PRO hand drill tap set "2352022"
DIN 352, HSS-G, metric, coarse thread acc. to DIN 13, 22 pieces
aach 1 taper, second and bottoming (M3 x 0,5 - M4 x 0,7 - M5 x 0,8 - M6 x 1,0 - M8 x 1,25 - M10 x 1,5 - M12 x 1,75) and 1 adj. tap wrench
