PROXXON Torque Screwdriver "MC5"
1/4" square, 1 -5 Nm
Automatic quick-release when tightening screws: clearly audible and palpable click signal when the selected torque is reached. Pre-setting of the torque by turning the knurled ring at the end of the handle. Fixing it by sliding it into position. Clearly legible scale display. Additional micro scale for fine adjustment: 1 rotation = 1,0Nm. Scale ring with 0,10Nm graduation, 6,3mm square for holding sockets and self-locking adapter with spring sleeve.
HAZET torque screwdriver "6004CT"
1/4" hexagon, length: 196 mm, reversible right - left - fixed
Ratchet function with freewheel mechanism, short 36° release travel with ergonomic release behavior and clearly audible signal. Accuracy ± 6 % of scale value (in actuating direction for right-hand tightening). Exceeding the set torque is prevented by the overload clutch ("slipper"). Easily recognizable locking status by means of Lock symbols. With calibration certificate and serial number, tested in accordance with DIN EN ISO 6789-2:2017.
0.02 - 0.3 Nm, scale graduation: 0.02 Nm(6004CT-3)
- Article number: 62028048
- Original number: 6004CT-12
0.2 - 1.2 Nm, scale graduation: 0.01 Nm(6004CT-12)
- Article number: 62028071
- Original number: 6004CT-3
SW-STAHL Torque Wrench "03913L"
1/4" hexagon mouth, T-handle, adjustment range: 2 - 8 Nm, incl. 12 bits
For tightening screws with small torque specifications in 0.1 Nm steps. With easy-to-read scale, magnetic holder and handy plastic handle.
Scope of delivery:
T-handle torque wrench (2 - 8 Nm)
12 bits: slot (3, 4 and 5), Phillips (PH1 and PH2), T-profile (T8, T10, T15, T20 and T25), inside hexagon (3 and 4)
KS-TOOLS torque screwdriver
1/4" square, 2 - 30 cNm, for controlled fastening in a clockwise direction
actuation accuracy: ±6 % tolerance of the set scale value, precise reading accuracy for a minimum 5.000 tightening cycles, with precision helical pressure spring, clearly noticeable torque release signal through ratchet (it is not possible to over tighten the set value), including a micrometre scale in Nm divisions for precise and fine adjustment, hexagon socket holder in accordance with DIN 3126 - E 6,3, electrostatically protect, aluminium handle
HAZET torque screwdriver "6005CT"
1/4" hexagon, length: 198 mm, reversible right - left - fixed
Ratchet function with freewheel mechanism, short 36° release travel with ergonomic release behavior and clearly audible signal. Accuracy ± 6 % of scale value (in actuating direction for right-hand tightening). Exceeding the set torque is prevented by the overload clutch ("slipper"). Easily recognizable locking status by means of Lock symbols. With calibration certificate and serial number, tested in accordance with DIN EN ISO 6789-2:2017.
4 - 10 Nm, scale graduation: 0.1 Nm(6005CT-100)
- Article number: 62028097
- Original number: 6005CT-100
WERA torque screwdriver "400 Hex torque indicator"
Sliding T-handle, inside hexagon, fixed torque value, tamper-proof, Hex-Plus profile
Error-free screw fitting thanks to non-overtightening slipping clutch and exact torque transmission. The robust slip clutch guarantees a clearly audible and perceptible release signal when the set torque is reached and it is impossible to overtighten the torque. Release torque is several times higher than the set tightening torque, meaning that for the most part no additional tools are required to loosen screw connections. The shape of the grip fills the entire hand well and the grips lie in the softly rounded recesses. This ensures optimum, ergonomic power transmission. Hex-Plus tools have larger contact surfaces to protect the screw head.
