CONTEC remover "TFP-400E"
self-service package, assembly or disassembly of the spider lockring and chain ring, for 1/2" socket, made of tool steel, CNC milled with silicone O-ring
suitable for Bosch Gen.2 Active / Performance / CX Line (from mod. 2014)
- Article number: 03706010
- Original number: 1067
CONTEC remover "TFP-410E"
self-service package, assembly or disassembly of the spider lockring and chain ring, for 1/2" socket, made of tool steel, CNC milled with silicone O-ring
suitable for Bosch Gen. 3 ActiveLine (from mod. 2018), Active Line Plus, Brose
Bosch Gen. 4 Performance Line, Performance Line CX, Cargo Line
- Article number: 03706011
- Original number: 1069
CONTEC remover "TFP-420E"
self-service package, assembly or disassembly of the spider lockring and chain ring, for 1/2" socket, made of tool steel, CNC milled with silicone O-ring
suitable for Shimano E8000, E7000, E6100
- Article number: 03706012
- Original number: 1071
CONTEC remover "TFP-430E"
self-service package, assembly or disassembly of the spider lockring and chain ring, for 1/2" socket, made of tool steel, CNC milled with silicone O-ring
suitable for Bosch Gen.1 (mod. 2010-2013) Classic Line, Classic+
- Article number: 03706013
- Original number: 1073
CYCLUS TOOLS Puller "Snap.in" SN.62-W
Puller for locknut on Bosch electric motor. This tool is suitable for removing the locknut to remove the sprocket from the motor.
for Bosch Active and Performance Line, Gen.2, from mod.14
- Article number: 03705019
- Original number: 7202762
CYCLUS TOOLS assembly tool
locking nut LocknutSpiderActive, assembling and disassembling of locknut in Bosch electric motor, large toothing, fits in the Snap-In holder
CYCLUS TOOLS remover "Snap.in" SN.12-I - Raceface
for internal bearing shells
SHIMANO diagnosis device
self-service package, for Di2 and STEPS drives, PC interface diagnosis device, firmware updates, fault diagnosis, change on the key layout
for Dura Ace Di2, Ultegra Di2, XTR Di2, Alfine Di2 and STEPS Gen.3
- Article number: 07700784
- Original number: ISMPCE02B
for Di2 und STEPS SM-PEC2, 1 x SM-PCE02, 1 x USB cable, 1 x PC-Link cable (EW-SD50-type), 1 x PC-Link cable (EW-SD300 type)
- Article number: 07700792
- Original number: ISMPCE02B3
CYCLUS TOOLS assembly tool
press-in and press-out set for Bosch Inner Sleeve BDU31
Set for pressing out and pressing in an inner sleeve / plastic bushing from and into the hole provided for a Bosch BDU31 system (Bike Drive Unit).
The inner sleeve / plastic bushing is used for the screw connection between the frame and motor. In the event of a motor replacement, it is necessary to remove these inner sleeves from the frame.
CYCLUS TOOLS assembly tool "Snap.in" SN.82-W
for lock nut pinion gear C- and P-line, with integrated thread guide
