for standard wheel hubs, 3 pieces
Allows you to clean quickly the wheel hub, before the brake disc is fitted. Consisting of: 1 holder and 3 discs (disc outer Ø: 160mm, hole Ø: 60mm), service life approx. 400 applications

for wheel hub cleaning set "1", disc outer Ø: 160mm, hole Ø: 60mm

adapter for brake ventilator, for brake fluid balance container of different vehicles
For proper ventilation of the brake line after changing the brake fluid.
Note: please find the exact assignment from the list

suitable for ATE collecting bottle # 03.9302-1424.2 and collecting container # 03.9302-0516.2
If the bleed hose is worn or cracked on receptacles, it can be easily and quickly exchanged. This allows the ATE collection containers to be reused without any problem.

for filling, flushing and bleeding the electric braking system, 5l
Two pressure stages (1,0 and 2,0 bar) adjustable via toggle switch, therefore control with a manometer is not necessary. No need to refill brake fluid. The jug is fixed in the device with a strap, the suction lance is held in the container by a screw connection. With holder for filling hose and power cable, holders for the three vent nozzles on the rear wall of the device and large handle for carrying. All materials are brake fluid resistant.
Technical data: power connection: 230V / 50 - 60 Hz, pump flow rate: 12 l/h at 2 bar counter pressure, automatic pump switch off at approx. 9mm rest filling level in container, connection cable length: 4,2m, filling hose length: 3,5m, dimensions (HxWxD): 530 x 270 x 250mm
Scope of delivery: compl. device, instruction, vent nozzles No. 20 (Europe nozzles)

spare part for all ATE brake fluid disponsal systems
With handle, hooks, securely screwing, one 700mm long bleed hose, half-transparent container with scale, self-locking outlet coupler and stand-base

for collecting of brake fluid
With flexible, transparent silicone hose to connect a bleed valve of different diameters and one scale which allows accurate check of the discharged brake fluid quantity

5 - 30l, with suction device and electronic pressure regulator (EDR)
For filling, flushing and bleeding the braking systems. Suitable for all common DOT3 and DOT4 brake fluids. Possible ditect removal from 5, 20 and 30l containers. It has three pressure levels ( 0,4 / 1,0 / 2,2 bar) and a variable pressure adjustment (from 0,4 -3,5 bar). A pressure gauge allows the control of the selected pressure. With central, ergonomic operating field is used to control the suction, filling and bleeding. Signal lights show the selected function.

Technical data: power connection: 100 - 240V / 50 - 60Hz, pump flow rate: min. 50l/h at 2 bar counter pressure, suction pump flow approx. 1,0l/min, automatic pump switch-off of by approx. 9mm rest filling level in container, connecting cable: 5,0m, filling hose length: 3,5m, dimensions (HxWxD): 915 x 475 x 380mm
Scope of delivery: device incl. collecting bottle (without liquid container), instruction, bleed vents No.: 20 (Europe nozzle)

for filling, flushing and bleeding the modern electronic braking system, 5l, for low-viscosity brake fluids
Variable pressure setting from 0,4 to 3,5 bar for all pressure ranges of leading automobile manufacturers. The working pressures are adjusted to the desired working pressure with a rotary knob and can be controlled with a pressure gauge of class 1,6. A special pump generates a pulsating fluid flow that supports the complete flushing and bleeding of the brake system. It is filled directly from the 5 liter jug, so no refilling is necessary. Canister is securely fixed in the device. Suction lance is held securely in the container with a rubber sealing cone. If the container is empty, the pressure pump is switched off by permanent pressure monitoring. This ensures that no air can be pumped into the brake system. With the holder on the side of the device for the filling hose and the power cable, as well as holders for three vent nozzles on the rear wall of the device. Incl. air vents No.: 20.

Technical data:
brake fluid content: 5l
power supply: 230V ~ , 50 - 60 Hz
pump flow rate: approx. 24 l/h bei 2 bar counter-pressure
working pressure: 0,4-3,5 bar stepless
automatic final shutdown of the pump: at approx. 9mm remaining filling level in the container
connecting cable length: 5 m IEC
fillling hose length: 3,5m
dimensions (HxWxD): 530 x 285 x 250mm
noise level: 66 dB(A)
Scope of delivery: device, manual, air vents No.: 20

Universal tool for e.g. for loosening oil filters or blocking clutches or flywheels. With non-slip leather strap. Working area: 25-160mm