suitable for ATE collecting bottle # 03.9302-1424.2 and collecting container # 03.9302-0516.2
If the bleed hose is worn or cracked on receptacles, it can be easily and quickly exchanged. This allows the ATE collection containers to be reused without any problem.

for brake piston, the lock is automatic and can be easily released with a lever, material: hardened steel

universal, adaptable form, signal color, 2 pieces
These hooks prevent the weight of the brake calliper from damaging the brake hoses. The fluorescent colour of the signal hose is easily detectable and prevents from leaving the tool on the vehicle. Dip-coated surface

suitable for #5007 (6.01 41 62/9) and #50008

for Audi, Seat, VW, Skoda, 3 pieces
Facilitates activating the bleed screws on the rear axles without removing the wheels. The open design of the key enables feeding through a silicon tube e.g. in a bleeding pump

consisting of:
1x special ratchet 150mm with angled head
1x bleed key SW11, 20mm short (e.g. VW Passat, Audi A4)
1x bleed key SW11, 65mm long (e.g. VW Golf V, Audi A3, Seat Altea, Skoda Octavia)

compressed air device, sucks the brake fuid of the wheel brake cylinder
The integrated venturisystem produces a powerful vacuum with which the brake system can be bleeded. With universal rubber nipple, also suitable for ABS. Refill system, adjustable bottle (angle), height: 27cm
Scope of delivery: Bavacuum pump "CHAMÄLEON" with automobile fluid changer kit 100422
Note: The basic unit can be expanded via the quick coupling wit the accessory kits brake fluid changer kit motorcycle (100423) and diesel filter filling and bleed kit (100428)

adapter for brake ventilator, for brake fluid balance container of different vehicles
For proper ventilation of the brake line after changing the brake fluid.
Note: please find the exact assignment from the list

coarse, bevel cut on one side, 12mm wide
For the removal of stubborn dust, rust and dirt from the disc brake caliper. One-sided cut prevents damage to the dust boot at the brake piston. With integrated blunt scraper at the face side for removing crude residues. Plastic handle with eyelet. Total length: 275mm, length 2: 165mm

for Ø 4,75mm, exclusively intended for DIN flaring
Exact positioning of the brake line in the device using a spacing adapter. Especially suited for direct application on brake and hydraulic lines on vehicles. For thin-walled pipes made of steel, aluminium and copper (metric/inch)

spare part for all ATE brake fluid disponsal systems
With handle, hooks, securely screwing, one 700mm long bleed hose, half-transparent container with scale, self-locking outlet coupler and stand-base