For easy assembly and disassembly of piston rings. Material: steel

short design, 2-components handle with hanging hole, length: 130mm, 4 pieces
For insertng and removing O-rings or seals and for removing the protection caps on wheel bolts.

Consisting of: 1x straight point, 1x 90° point, 1x hook point, 1x piercing awl

strap wrench, with rubberized textile strap, strap length: approx. 460mm

Universal tool for e.g. for loosening oil filters or blocking clutches or flywheels. With non-slip leather strap. Working area: 25-160mm

3/8", 12-point, 14mm, with magnetic insert

3/8", outside hexagon 27mm, diameter: 82mm, 14-point, SW 74,4mm
For the operation of oil filters and oil filter housing caps

For MANN- and KNECHT-filter, OPEL Longlife-filter. Also suitable for: Mercedes-Benz cars with 2,2l CDI engine, M 102, M 103, M 104, M 110, M 111, M 119, M 120, M 613, Sprinter 2,2l Turbo MY 2006-, Audi A4 2,0 MY 2002-, A4 4-cyl. fuel from MY 12/2007, BMW Pkw / Motorrad, K-models = K 75-1100 LT, model-series F and K, VW Passat 1,9 TDI pump nozzle injection, Passat B7 1,4 - 1,8 - 2,0l TSI, Golf Plus 2,0 MY 2005-, Golf 6 1,6l and 1,2/1,4/1,8/2,0 TSI, Golf 7 1,2 -1,4 TFSI, Polo 5 1,2l - 1,4l TSI, Tiguan MY 2007- 1,4l TSI (110kW) 2,0l TSI, and Ford, Opel, Porsche, Peugeot, Citroen, Renault, Nissan, Toyotan Mazda, etc.

hooks, scraper, piercing awl, 2-component plastic handle, length: 260mm, 5 pieces
For removing and installation of O-rings and seals and for removing stickers and remains of seals and adhesive.

Consisting of: 1x straight point, 1x 90° point, 1x hook point, 1x piercing awl (wide)

for maintaining and cleaning cylinders, bearing shells, boreholes, tubes, etc.
Special steel, with exchangeable, self-spreading and re-tensioning honing arms, as well as a flexible drive shaft for pneumatic machines or electric drills.

For fitting and removing the water pumps stretch belts on Citroen / Opel / Peugeot / Toyota
This tool is suitable for damage-free fitting of the Straps over the water pump pulley on 1.0 Vti and 1.2 L PureTech/Vti/THP 3-cylinder petrol engines from model year 2012. It is essential for water pumps with plastic pulleys.

Suitable for:
Peugeot 108 / 208 / 301 / 308 / 2008 / 3008 / 3008 II / 5008 / 5008 II / Citroen Berlingo III / IV / C1 II / C3 III / IV / Aircross / Picasso / C4 II / Cactus / Picasso / Grand Picasso II / SpaceTourer / Grand SpaceTourer / C5 Aircross / C-Elysee / DS 3 / 3 II / 3 Cabrio / 3 Crossback / 4 / 4 II / 4 Crossback / 7 Crossback / Opel Astra L / Combo (X19) / Corsa F / Crossland / Crossland X / Grandland X / Mokka / Toyota Aygo / Proace City

Engine codes:
03S, B12XE, B12XHL, B12XHT, D12XE, D12XHL, D12XHT, EB0, EB0F, EB2, EB2ADT, EB2ADTD, EB2ADTDS, EB2ADTS, EB2ADTX, EB2DT, EB2DTM, EB2DTS, EB2DTSM, EB2F, EB2FA, EB2FAD, EB2FB, EB2M, F12XE, F12XHL, F12XHT, HMH, HMM, HMP, HMR, HMT, HMV, HMW, HMX, HMY, HMZ, HNE, HNK, HNN, HNP, HNS, HNV, HNW, HNY, HNZ, LEG, LES, LEZ, ZMZ

OEM reference no:
I01091 / I01091B / EN52112 / EN521121

Injector impact puller, pneumatic, 24 pcs.
For gentle removal of seized diesel injectors without force and to prevent damage to the cylinder head / cylinder head cover due to high forces from supports.

Consisting of:
Pneumatic diesel injector extractor
Extensions for deep-seated injectors or installed installation spaces
Universal claw
21 Adapters:
M17 x P1.0 for BOSCH 110
M18 x P0.75 for BOSCH 120 ∙ M20 x P1.0 for Denso ∙ A
Adapter with internal thread M12 x P1.5 ∙ External thread M20 x P1.5
Adapter with internal thread M14 x P1.5 ∙ External thread M22 x P1.5 ∙ M14 x P1.5 for Delphi
M16 x P1.0 for Toyota
M18 x P1.5 ∙ M8 x P1.0 ∙ M8 x P1.25 ∙ M10 x P1.0 Universal Adapter
M14 x P1.5 ∙ M14 x P1.0 ∙ M25 x P0.5 for Denso ∙ NISSAN
M25 x P1.0 for SIEMENS
M27 x P0.75 for BOSCH ∙ FIAT ∙ BMW ∙ PSAW ∙ PSA ∙ MERCEDES-BENZ ∙ RENAULT
M27 x P1.0 for complete thread for SIEMENS ∙ M29 x P1.0 for Delphi
M31 x P0.75 for BOSCH CRIN 1
M26 x P0.75 for BOSCH CRIN 2