2 screws

2 piecesThe handle can be removed from the wire rope to easily perform the rope through tight and hard to reach places.Technical data:net Ø: 20mmwire rope total length: 450mm

dimensions (LxW): 33 x 12mmThe nipple at the lower end of the old bowden cable is removed by a side cutter to implement the wire in the mounting aid and to be able to clamp with the grub screw. The nipple of the new Bowden cable is mounted in the mounting aid. The new and old Bowden cables are now connected. Now the old Bowden cable can be loosened and pulled out by the lever.

2 screws

for M5 threadThe assembly aid is screwed onto the threaded end of the old brake cable and the nipple of the new brake cable mounted in the mounting aid. The old and new cable is now connected. Now the old brake cable can be loosened and pulled out at the lever.Technical data:dimensions (LxW): 33 x 12mm

for M6 threadThe assembly aid is screwed onto the threaded end of the old brake cable and the nipple of the new brake cable mounted in the mounting aid. The old and new cable is now connected. Now the old brake cable can be loosened and pulled out at the lever.Technical data:dimensions (LxW): 33 x 12mm

cable total length: 110mmThe adapter of the flexible tool cable should be mounted to the old cable of the speedometer connection nut. The old cable must be now pulled out from the below side and automatically pulls the cable of the tool with it. Once the cable is out, it should be dismounted from the adapter and screwed to the new cable. When you know pull on the upper grip of the replacement tool the new cable is automatically pulled through the same way, backwards to the speedometer.

incl. rollers