soda/ sodium bicarbonate, sieve fraction ( smaller as 0,5mm): 95%, water content: smaller as 0,25%
To the eco-friendly soda blasting (baking soda blasting) of all possible surfaces such as glass, plastic, rubber, wood, stone and aluminum. Chloride and sulphate content smaller as 150 ppm

suitable for a variety of blasting agents, e.g. quartz, glass peen shot, plastic peen shot and more
Sandblasting cabin for clean blasting work without soiling the wotk environment. Ideal for cleaning, rust or paint removale from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims and hinges. Premium latex work gloves fastened on housing. View window and adhesion-bonded protective film, for the best possible view and occupational protection while processing the workpiece. Cover and door frame with circumferential seals for dust-free work. With stable grid shelf for depositing workpieces on the inside of the cabinet. With drain opening for changing the blasting agent. Extraction hose for blasting agent fastened on bottom of catchment container. With external compressed air coupling. Rubber feet for stable stand.

Technical data: cabin volume: 90l, air consumption: 200 - 350 l/min, working pressure: 2,8 - 8,0 bar, compressed air connection: 3,8", abrasive grain size: 40 - 120 mesh, dimensions: internal 580 x 480 x 300mm / external 590 x 489 x 490mm, weight: 17kg
Scope of delivery: high quality blasting gun with ceramic nozzle, 4 pieces ceramic nozzles (4/5/6/7mm), 12 Volt neon tube with 230 Volt power supply and external switch, incl. 5 pieces spare foils for view window, 2 large and integrated latex gloves

for clean blasting work without soiling the working environment
Suitable for various blasting materials such as quartz, glass or plastic ball. For cleaning, derusting or paint removal from all kinds of metal parts, e.g. engine parts, fittings, signs, housings, rims, hinges. High quality latex work gloves are firmly attached to the housing. A viewing window with glued-on protective film enables optimum visibility and compliance with occupational safety during workpiece processing. All-round seals on the lid and door frame ensure dust-free working. With sturdy storage grid for placing workpieces inside the cabin, a drain opening for changing the blasting material, a compressed air connection on the outside and a suction pipe for the blasting material attached to the bottom of the collection container. Suitable for glass bead, corundum and plastic blasting media, as well as silicon carbide, etc.

Technical data:
air requirement: on average approx. 400 - 800 l/min
working pressure: 3,4 - 8,0 bar
abrasive grain size: 0,12 - 0,25mm
weight on the support grid: max. 120kg
weight of blasting material: max. 75kg
suction capacity: 17, 4 m³/h
vacuum extraction system: 8,5 kPa
volume flow suction system: 156 m³/h
extraction power: 1200 W
volume of working cabin: 360 l
length cabin inside: 1160mm
width cabin inside: 580mm
height cabin inside: 580mm
hand hole diameter: 175mm
length: approx. 1225mm
width/depth: approx. 935mm
height: approx. 1640mm
weight: approx. 115kg

Scope of delivery: blasting gun with ceramic nozzle, 4 ceramic nozzles (6/6/7/7mm), 5 spare foils for viewing window