size adjustable, allows easy carrying all vehicle batteries

the turnable crown with saddle and rubber pad, mobile
For removal and installation of gearboxes, fuel tanks and exhausts. The spring-loaded discharge device has a deadman function. The wide chassis ensures more stability and maneuverability under load

load capacity per pair: 900kg, for cars
move vehicles with ease, incl. damaged, locked or blocked vehicles. for sideways movement or rotating on the spot, with steering castors for optimum manoeuvring in carmped spaces. Individaul size (L x W x H): 60,2 x 38,5 x 14,0cm, individual weight: 9kg

hydraulic chassis as vehicle positioner, load capacity: 680kg
Energy-saving moving of vehicles. For sideways movement / turning on the spot. Easy lift via foot pedal without bending over. Extandable from 27,0cm - 55,0cm. Light aluminium design. With castors for best maneuverability even in confined spaces

suitable for Tesla models 3 / S / X / Y, 4 pieces
Suitable for rubber pads with 120-140mm outer diameter. It is suitable for use on lifting platforms and jacks and is made of high-strength and dimensionally stable special POM (polyoxymethylene) plastic to prevent damage due to bouncing. A circumferential gripping groove facilitates disassembly after lowering.

Note from the manufacturer: Mandatory when lifting Tesla Model 3, S, X and Y. Without using these adapters, there is a risk of damaging the battery box or even the battery. The adapters are inserted into the locating hole under the vehicle and aligned over the existing rubber plate from the support arm of the lift or jack.

max. load capacity: 1000kg, foldable, dimensions: 148,0 x 160,0cm
Swivel pump handle position enables operation by just one mechanic. All Compac hydraulic cranes are robust in use and fast in function. Spring loaded lowering system with dead man control. Low legs allow an easy access under low vehicles.

for transmission jacks, capacity: 18,9l, incl. adapter
for collecting e.g. transmission oil, antifreeze and brake fluid, with ergonomic handle and outlet spout

load capacity: 750kg, stepless adjustable: 136,0-203,0cm, with pedal, steel
For all work under the vehicle when extra support is needed. Stable trapeze threaded spindle, large foot and foot pedal for precise adjustments (2,0cm)

jack mount kit, outside Ø 76,6mm, suitable for Tesla models 3/S/X
When performing maintenance (which requires lifting the vehicle off the ground) on any of the Tesla models listed above, it is imperative that the vehicle be lifted correctly to avoid damage to the high voltage battery located under the vehicle. All of these Tesla models have four specific pick-up points. The kit fits exactly into these pick-up points, which are specifically designed for this purpose. Can be used with a hydraulic jack or a lifting platform.

stepless adjustable 54,0 - 120,0cm
For keeping engine hood or trunk wide open, e.g. when replacing original gas struts or repairing car body. Adjustment by turning telescopic element. With rubber coated ends for secure stand and prevent slipping away