universal, for lifts
These supports fit on platforms used, for example, in body shops. Due to a wooden core, they are very light.

for lift

universal, rubber, for lifts, 50 x 480 x 1000mm, incl. 2 integrated handles
Suitable for all scissor lifts, as well as 2- and 4-post lifts. The ramps enable the vehicle's approach angle to be reduced in order to avoid contact with the sill or the underbody. Furthermore, due to the elevated position of the vehicle, a rubber block or the support arm fits between the lifting platform and the vehicle, so that safe lifting is ensured. Made of dense high quality rubber granules, the ramps are very resistant as well as liquid repellent and due to the high weight, the panels rest firmly on the ground without the need to fix them.

PE block, for lift, universal fit

suitable for Tesla models 3 / S / X / Y, 4 pieces
Suitable for rubber pads with 120-140mm outer diameter. It is suitable for use on lifting platforms and jacks and is made of high-strength and dimensionally stable special POM (polyoxymethylene) plastic to prevent damage due to bouncing. A circumferential gripping groove facilitates disassembly after lowering.

Note from the manufacturer: Mandatory when lifting Tesla Model 3, S, X and Y. Without using these adapters, there is a risk of damaging the battery box or even the battery. The adapters are inserted into the locating hole under the vehicle and aligned over the existing rubber plate from the support arm of the lift or jack.

jack mount kit, outside Ø 76,6mm, suitable for Tesla models 3/S/X
When performing maintenance (which requires lifting the vehicle off the ground) on any of the Tesla models listed above, it is imperative that the vehicle be lifted correctly to avoid damage to the high voltage battery located under the vehicle. All of these Tesla models have four specific pick-up points. The kit fits exactly into these pick-up points, which are specifically designed for this purpose. Can be used with a hydraulic jack or a lifting platform.

for lifts

for floor pump

universal, retrofit set, suitable for all 2-post lifting platforms, consisting of 220V socket and compressed air connection