hammered nozzles, shaft 17mm
Work after the suction - or injector principle and are generally operated with an oxygen pressure of 2,5 bar and an acetylene pressure of 0,5 to 1 bar. They are largely secured against back-firing and are marked according to BGV D1 (VBG 15). Nozzle hammered

MIG/MAG solid wire coil, for welding different metals

for car body work, straight

2 x 2m, heat resistant short-term up to 600°C
Made of fibre fabric for grinding and welding work. Alufix coating on one side, approx. 650g/m², slideproof and flexible. Fabric tested to DIN 4102-1, class B1, flame retardant

For permanently protected welding connections. Shortly before the welding apply thinly with the brush. Does not splash, develops no toxic fumes

accessory for minispotter, copper-plated, 100 pieces

accessory for minispotter, D=8,5mm, DIN 433, washers

hand shield from grey ABS plastic, perforated design, without glasses
ribbed plastic handle, light and stable, heat resistant up to approx. 120°C. Easy glass change from the inside. Tested and approved after EN 175. Weight: approx. 393g

for acetylene and oxygen, mounted with hose clamps, hose size: 4 x 3,5mm
Autogenous hose set made of acetylene and oxygen hose. All 100cm connected via double shell. Acetylene hose on both sides with grommet and union nut 3/8" left, oxygen hose on both sides with grommet and union nut 1/4" right. Tested and approved after EN 559. Working pressure max. 20 bar. Material: SBR-NR

for protective gas burner type 15, copper, nickel-plated, with plug-on flange or M10 thread