BIKESERVICE Strut Press
max. capacity: 4t
- Article number: 05770003
- Original number: BS4100
For assembly and disassembly of springs from shock absorbers. With the supplied pressing plate, this tool can also be used as a workshop press. The press can be used for shock absorber with a length up to 40cm (middle of lower recording top point spring) and used up to 125mm diameter spring.
The connecting strut and the holders of the mounting plates can be easily adjusted in height through a quick-release fastener (with safety lock). In addition, the height of the lower holder can be adjusted up to 60mm by threadTechnical data:total dimensions (LxWxH): 165 x 279 x 650mmmax. capacity: 4tpiston stroke: 115mmcompression force: 4tmandrel adapter Ø: 4 - 18mmamount of adjusting levels: 9level distance: 40mmadjustable height of each level: 20mmpress plate hole Ø: 25mmUsage hint:For a safe standing position the floor plate of the strut press must be screwed firmly to a table. Hole diameter of the adapters: 13mm. The adjustable connection strut must be fitted for safety reasons at every Assembly and disassembly of the spring!
Product information
- Main colour: black
- Type: Article
- Supplier Article Number:: BS4100
- MSRP: €360.00
- Brand/Supplier Bikeservice
- Unit of measure: PIECE
Product variants
| Article | Price | |
|---|---|---|
 BIKESERVICE Strut Press max. capacity: 4t The connecting strut and the holders of the mounting plates can be easily adjusted in height through a quick-release fastener (with safety lock). In addition, the height of the lower holder can be adjusted up to 60mm by threadTechnical data:total dimensions (LxWxH): 165 x 279 x 650mmmax. capacity: 4tpiston stroke: 115mmcompression force: 4tmandrel adapter Ø: 4 - 18mmamount of adjusting levels: 9level distance: 40mmadjustable height of each level: 20mmpress plate hole Ø: 25mmUsage hint:For a safe standing position the floor plate of the strut press must be screwed firmly to a table. Hole diameter of the adapters: 13mm. The adjustable connection strut must be fitted for safety reasons at every Assembly and disassembly of the spring!
|