BS-BATTERY LiFePO4 Battery "BSLI-12"
MTF
- Article number: 05376900
- Original number: 360112
replaces following lead-acid batteries: YIX30L, YTX20L,YB30L-B, YB30CL-B, Y60N24AL-B, YIX30L-BS, YTX20L-BS, 52515, 53030, 12N24-3A
We recommend that you check the battery pole screws every six months for tightness and retighten if necessary.
MTF, ready-to-use, powerful, safe, long life service waterproof, very low slef-discharge, robust brass connectors (except BS-LI01), Vertical and horizontal screw connection possible (except BS-LI02), robust nylon housing.
Note: Lithium batteries must be fully charged with a suitable lithium charger (LiFePO4) before initial operation!
More than 2000 charge cycles possible, approx. 70% lighter as lead-acid batteries, fuel-efficient, possible fast charging in 6 minutes, environmentally neutral, with LED-charge status display, lithium-iron phosphate LiFePO4 as cathode material. Possible installation in any position, even overhead
Battery status indicator with 6-LED bars, with only three LEDs, the battery should be recharged. Use only suitable chargers.
Product information
- Bleeding: without
- Capacity 10 Hr: 8.0 Ah
- Cold start current CCA: 560 A
- Design: MTF , ready-to-use
- Energy: 96.00 Wh
- Height: 130.0 mm
- Length: 165.0 mm
- Minus pole: front left
- Plus pole: front right
- Range of application: motorcycle
- Screwing: M6
- Type: Article
- Voltage: 12V
- Width: 86.0 mm
- Supplier Article Number:: 360112
- EAN: 3564093601126
- MSRP: €359.50
- Brand/Supplier BS-BATTERY
- Unit of measure: PIECE
| Article | Price | |
|---|---|---|
 TECMATE Battery Charger "OptiMATE Lithium 4S 0.8A" charging voltage: 12V
| ||
 TECMATE Battery Charger "OptiMATE Lithium 4S 5.0A" charging voltage: 12V
| ||
 BS-BATTERY battery charger "BS30" 12 Volt
| ||
 TECMATE Battery Charger "BatteryMATE 150-9" charge tester and charger in one Quick activation of new batteries - 30-minute activation charge only for new batteries filled with acid immediately before charging, such as STD wet batteries with removable caps and "dry-charged'"AGM-MF batteries supplied with a special separate acid pack.Charge detector selectable from 15A to 150A - automatically tests the starting current of the battery up to 330CCA. A 3-second test simulates the normal engine start / stop, and a 15-second test determines the health of the battery.Motorsports specific loading algorithm - 4-stage charge saves every 12V battery. MF-mode allows for up to 16,9V for "dry charged" AGM batteries.Temperature regulated charge - the charging voltage is adapted to the ambient temperature. (-4 mV/°C/cell over/less 68°F/20°C).Exact voltage measurement - the charging cables are provided with integrated voltage sensor wires for the accurate measurement of voltage at the battery.User-friendly - the 6 position combo box switch allows selection of the correct test and charging current for the connected battery. TEST and then select the maximum charging time according to the result, press the LOAD button. The program automatically completes the charge and then checks the battery.- CHARGING CURRENT: 9A max., 1, 2, 3, 5, 7, 9 Amp-choice- TEST CURRENT: 150A max., 15, 35, 50, 70, 100, 150 Amp-choice- USAGE: rooms/workshop enviroment (lowest temperature: -4°F / -20°C).- RESCUE: start with low voltage of 1V + desulaftion rescue with high performance- IDEAL FOR: STD, AGM & GEL 12V batteries from 2 - 40Ah- INPUT: selectable 110-120VAC / 220-240VAC 50-60Hz, with main switch and exchangeable fuse- VERSION: Ventilated industrial housning with optional wall bracket (TS-218), 6ft / 180cm power cable and 1 pair 6ft / 180cm charging cables for high current consumption with high performance battery terminalSAFE: No risk of overcharging. Spark suppression. Safe for long-term battery maintenance. Automatic shutdown in case of short circuit or disconnected battery. 2 years guarantee
| ||
 BAAS Disconnect Switch "BA18" switch incl. cable
|
Product variants
Using the search field, you can refine the selection of product variants.
| Article | Price | |
|---|---|---|
 BS-BATTERY LiFePO4 Battery "BSLI-12" MTF
| ||
 BS-BATTERY LiFePO4 Battery "BSLI-12" Lithium-MAX, MTF, performance optimised More than 2000 charging cycles possible, up to 70 % lighter than lead-acid batteries, fuel-saving, fast charging possible in 6 minutes, environmentally neutral, with LED charge level indicator, lithium iron phosphate LiFePO4 as cathode material. Can be installed in any position, even upside down.Indicator, battery status display with 6-LED bar, if only three LEDs are displayed, the battery should be recharged. (Please only use charging devices suitable for lithium batteries).More capacity and starting power thanks to enlarged pouch cells, Housing heat-resistant up to +230°C, can be mounted in any position, even upside down.
|