BUSCH & MÜLLER LED rear light "Toplight Flat S plus"
distance between screws: 50mm, bulk, without clamp sleeve (0.311.215/8)
- Article number: 03113230
- Original number: 329/5ASK0211
carrier attachment, with standlight, with German approval mark
LineTec, very light and flat design, 220° visibility, with plug (middle) for power and ground cable, no grounding over the mounting bolts, large brightnesseven by slow speed, the operating life of diodes approx. 100.000 hours, Z- large surface reflector, dimensions approx. 117 x 50 x 20mm, approx. 65g
Product information
- Attachment: carrier 50mm
- Bidex-Code: 207040
- DST-Code: 2E03
- Design: rear light
- Features: reflector
- Fedas-Code: 160672
- Functions: standlight
- Illuminant: LED
- Main colour: red
- Power supply: dynamo operated
- Range of application: bike
- Secondary colour: transparent
- StVZO conform: yes
- Type: Article
- Supplier Article Number:: 329/5ASK0211
- EAN: 4006021010147
- MSRP: €9.90
- Brand/Supplier Busch + Müller
- Unit of measure: PIECE
| Article | Price | |
|---|---|---|
 BUSCH & MÜLLER clamp sleeve for rear light Toplight Flat Plus 429 KH
|
The "Toplight Flat S plus" LED Carrier Light from BUSCH & MÜLLER is a must for your safety on the road and impresses with its slim and lightweight design. Its 220° visibility allows you to be seen from all sides, while the brightness is maintained even at low speeds.This rear light shows good brightness even at low speeds. The diode lasts an impressive 100,000 hours - that's long-term lighting at its best. With the Z large-area reflector, your safety is always in focus.The plug contacts for power and earth connection (positioned in the middle) make installation child's play. No need to route the earth via the Mounting Bolts - simply connect and get started!
Product variants
Using the search field, you can refine the selection of product variants.
| Article | Price | |
|---|---|---|
 BUSCH & MÜLLER LED rear light "Toplight Flat S plus" vario bolts: distance between screws: 50 / 80mm, self-service package
| ||
BUSCH & MÜLLER LED rear light "Toplight Flat S plus" distance between screws: 80mm, bulk, without clamp sleeve (0.311.215/8)
| ||
BUSCH & MÜLLER LED rear light "Toplight Flat S plus" distance between screws: 50mm, bulk, without clamp sleeve (0.311.215/8)
| ||
BUSCH & MÜLLER LED rear light "Toplight Flat S plus" vario bolts: distance between screws: 50/80mm, 6 in workshop package
|