BS-BATTERY LiFePO4 battery "BSLI-06"
replaces following lead-acid batteries: YTZ10S, YT12B-4, YT12B-4, YTX14AH, YT12B-BS, YB12A-A, YB12A-B, YB12B-B2, YTX14AH-BS, YT14B-BS, YB12C-A, YB14-A2, YB14-B2, YB14A-A1, YB14A-A2, 12N12A-4A-1, YTZ12S, YTZ14S, YTX12, YTX14, YT12A, YTX14H, YT12S-BS, YTZ10S-BS, YTZ12S-BS, YTZ14S-BS, YTX12-BS, YT12A-BS, YTX14-BS, YTX14H-BS
ready-to-use, powerful, safe, long service life, waterproof, low self-discharge, robust brass connections, battery status indicator, possible vertical and horizontal screwing, robust nylon housing, incl. foam adhesive pads to adapt to the existing battery box
Note: Lithium batteries must be fully charged with a suitable lithium charger (LiFePO4) before initial operation!
We recommend to check the battery pole screws every six months for a firm fit and retighten if necessary.
More than 2000 charge cycles possible, approx. 65% lighter as lead-acid batteries, fuel-efficient, possible fast charging in 6 minutes, environmentally neutral, with LED-charge status display, lithium-iron phosphateLiFePO4 as cathode material. Possible installation in any position, even overhead
Battery status indicator with 6-LED bars, with only three LEDs, the battery should be recharged. Use only suitable chargers.
BS-BATTERY LiFePO4 Battery "BSLI-02"
replaces following lead-acid batteries:YTZ5S, YTZ7S, YTX4L, YTX5L, YTZ7S-BS, YTX4L-BS, YTX5L-BS, YTX7L-BS, YB4L-B, YB5L-B, YB6.5L-B, 12N5-3B, 12N5.5-3B, 12N7-3B
ready-to-use, powerful, safe, long service life, waterproof, low self-discharge, robust brass connections, battery status indicator, possible vertical and horizontal screwing, robust nylon housing, incl. foam adhesive pads to adapt to the existing battery box
Note: Lithium batteries must be fully charged with a suitable lithium charger (LiFePO4) before initial operation!
We recommend to check the battery pole screws every six months for a firm fit and retighten if necessary.
More than 2000 charge cycles possible, approx. 65% lighter as lead-acid batteries, fuel-efficient, possible fast charging in 6 minutes, environmentally neutral, with LED-charge status display, lithium-iron phosphateLiFePO4 as cathode material. Possible installation in any position, even overhead
Battery status indicator with 6-LED bars, with only three LEDs, the battery should be recharged. Use only suitable chargers.
SKYRICH LiFePO4 Battery "HJTZ5S-FP"
Replaces the following lead-acid batteries: YTX4L-BS, YTZ5S, YTX5L-BS
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!
We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.
SKYRICH LiFePO4 Battery "HJTX5L-FP"
Replaces the following lead-acid batteries: YTX4L-BS, YTX5L-BS
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!
We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.
BS-BATTERY LiFePO4 Battery "BSLI-03"
replaces following lead-acid batteries: YT7B-4, YT9B-4, YTX7A, YTX7A-BS, YT7B-BS, YT9B-BS, YTX9-BS, YB9-B, 12N9-4B-1
ready-to-use, powerful, safe, long service life, waterproof, low self-discharge, robust brass connections, battery status indicator, possible vertical and horizontal screwing, robust nylon housing, incl. foam adhesive pads to adapt to the existing battery box
Note: Lithium batteries must be fully charged with a suitable lithium charger (LiFePO4) before initial operation!
We recommend to check the battery pole screws every six months for a firm fit and retighten if necessary.
More than 2000 charge cycles possible, approx. 65% lighter as lead-acid batteries, fuel-efficient, possible fast charging in 6 minutes, environmentally neutral, with LED-charge status display, lithium-iron phosphateLiFePO4 as cathode material. Possible installation in any position, even overhead
Battery status indicator with 6-LED bars, with only three LEDs, the battery should be recharged. Use only suitable chargers.
BS-BATTERY LiFePO4 Battery "BSLI-10"
replaces following lead-acid batteries: YTX20L, YTX20HL, YTX24HL, YTX20L-BS, YTX20HL-BS, YTX24HL-BS, Y50N18L-A, Y50N18L-A2, Y50N18L-A3, Y50N18L-AT
ready-to-use, powerful, safe, long service life, waterproof, low self-discharge, robust brass connections, battery status indicator, possible vertical and horizontal screwing, robust nylon housing, incl. foam adhesive pads to adapt to the existing battery box
Note: Lithium batteries must be fully charged with a suitable lithium charger (LiFePO4) before initial operation!
We recommend to check the battery pole screws every six months for a firm fit and retighten if necessary.
More than 2000 charge cycles possible, approx. 65% lighter as lead-acid batteries, fuel-efficient, possible fast charging in 6 minutes, environmentally neutral, with LED-charge status display, lithium-iron phosphateLiFePO4 as cathode material. Possible installation in any position, even overhead
Battery status indicator with 6-LED bars, with only three LEDs, the battery should be recharged. Use only suitable chargers.
SKYRICH LiFePO4 Battery "HJTX9-FP"
Replaces the following lead-acid batteries: YTX9-BS, YTR9-BS
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!
SKYRICH LiFePO4 Battery "HJTZ7S-FP"
Replaces the following lead-acid batteries: YTZ7S, YTX7L-BS
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!
We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.
SKYRICH LiFePO4 Battery "HJTX14H-FP"
Replaces the following lead-acid batteries: YTX14H-BS, YTX14-BS, HVT-8
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!
We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.
SKYRICH LiFePO4 Battery "HJT12B-FP"
Replaces the following lead-acid batteries: YT14B-BS, YT12B-BS, YB16AL-A2
Note: Lithium batteries must be fully charged with a suitable lithium charging device (LiFePO4) before first use!
We recommend checking the battery terminal screws for tightness every six months and retightening if necessary.
