Easy and quick one-handed method for bleeding the brake system, mounting with supplied mounting clamps, transparent hoses, one-way alloy valve prevents air from being sucked into the system.

low pressure/vacuum pump, PVC, up to max. -1000 mbar, to control and adjust negative pressure operates functions at the vehicle

For easy bleeding of brake systems as well as checking the function of vacuum-controlled systems or components

Technical data:
cassette total dimensions (LxWxH): 200 x 300 x 85mm
vacuum measuring range: (0 - 1,01 bar)

The set contains of following articles:
hand pump with pressure gauge with drain valve
liquid reservoir: 120ml
2x hose Ø 5 x 8m, length: 50cm
hoe Ø 5 x 8mm, length: 100mm
hose Ø 4 x 6mm, length: 70mm
2x plug Ø 3 - 10mm (conical)
suction cup Ø 30mm
suction plug Ø 8,5 - 25mm (conical)
3x adapter for brake bleed screw (Ø 5, 6, 7mm)
9x hose adapter Ø 4 - 12mm

For testing pressure loss in the cylinder of petrol and diesel engines. Suitable for cars, rollers and motorcycles thanks to the adapters supplied.

For easy testing of pressure loss by fuel and diesel engine cylinders. Suitable for cars, scooters and motorcycles, thanks to incl. adapter (M10, M12, M14, M16, M18)

Instruction: check the pressure loss
The spark plug of the respective cylinder is replaced by one of the supplied adapters. Then the compressed air must be connected to the pressure loss tester. The pointer should now swing to the left. After that, the control valve must then be pulled out of the locking and turned up until the pointer is exactly on the zero percent mark. Then the adapter must be connected to the pressure loss tester. The display now shows the percentage pressure loss of the cylinder. the pressure loss is OK with a value between 0 - 20%.

Technical data:
cassette total dimensions (LxWxH): 200 x 300 x 85mm
compressed air connection: NW 7,2
pressure input: 4,8 - 11,0 bar
pressure outlet: 4,1 bar

The set contains following articles:
cylinder leakage tester - percentage display of pressure loss, with control valve
adapter - M10, length: 260mm
adapter - M12, length: 260mm
adapter - M14, length: 260mm
adapter - M16, length: 260mm
adapter - M18, length: 260mm
4x spare seal rings

pressure/vacuum pump, metal, max. vacuum: -1000 mbar, max. pressure: 4000 mbar
To control and adjust pressure and low pressure operated function at the vehicle. Metal pump with integrated combined change-over and drain valve.