special designed for motorcycle tires, max. tire diameter: 990mm, max. rim width: 12"
Chucking table with fixed clamping claws guaratnees maximum rigidity during assembly. With self-centering locking, internal clamping 12 - 19,5" and external clamping 5 - 24".
Technical data: pressure force: 3000kg, max. locking device turning moment: 1200 Nm, locking device turning speed: 6,5 rpm, three-phase motor: 400V / 50Hz / 0,55KW, working pressure: 8 - 10 bar, colour: anthracite / RAL 7016

max. tire diameter: 1050mm (41"), max. rim width: 12", tiltable
with double-acting bead break pistons from light metal, assembly paste holder, FS unit, self-centering clamping device and pedal operating. Assembly head working area 8 - 24", bead break shovel flexible and shaped, assembly head with aluminium rim protection, control of assembly head with automatic removal of the rim, metal side cover
Technical data: external clamping: 10 - 20", internal clamping: 12 - 22,5", bead break strength: 3600kg, motor power: 0,75 kW, turning speed: 7,3 rpm, max. torque: 1200 Nm, electro connection: 230 - 400 V / 50 - 60 Hz, colour: anthracite / RAL 7016

Note: plus freight and discharge costs

automatic, without tire lever, with pneumatic bead retractor, for tires Ø from 10-30", max. tire width: 15"
The leverless tire changer is equipped with a patented tool that allows fast and effortless work, even with new types of tires (ultra-low profile / RUN-FLAT tires). The central fixture with swivel plate, which is also suitable for drop-center rims, has a self-locking mechanism that makes the operator's work easier. The rotation speed can be adjusted at any time (0-15 rpm) thanks to an inverter motor (1.5 kW) with a speed limiter to protect the tire from excessive forces, colour: anthracie / RAL 7016
Scope of delivery: tire changer, incl. quick-release nut, auxiliary mounting arm, wheel lift and WDK-KIT

rim Ø: 10" - 30", wheel width 15", total wheel Ø 47"
Leverless tire mounting technology for work even with difficult wheel-tire combinations. A stepless inverter motor enables dynamic screwing in. This gives the bead enough time to slide into the drop center and reduces stress at the traction point to a minimum. No cables, chains or Bowden cables are required to adjust the tool. Already included in the scope of delivery: pneumatic auxiliary arm, bead chain, pedal controlled tire inflator, protection for aluminum rims / reverse mounting, stepless inverter motor (0 - 18 rpm)

Technical data:
wheel clamping diameter: 10" - 30"
max. wheel diameter: 1200mm / 47"
max. wheel width: 380mm / 15"
motor power: 1,5 kW - inverter
max. torque: 1200 Nm
speed: 0 - 18 rpm
max. opening bead breaker: 35"
bead pressure force on blade (10 bar): 12000 N
working pressure (recom.): 8 - 10 bar

automatic, without assembly lever, for tire Ø from 10 - 30", max. wheel width 15"
The leverless tire changer is equipped with a patented tool that allows fast and effortless work, even with new types of tires (ultra-low profile / RUN-FLAT tires). The central fixture with swivel plate, which is also suitable for drop-center rims, has a self-locking mechanism that makes the operator's work easier. The rotation speed can be adjusted, thanks to an inverter motor (1.5 kW) with speed limiter to protect the tire in case of excessive forces (0-15 rpm), colour: anthracie / RAL 7016
Scope of delivery: tire changer

electric motor with Ergolock clamping function, for high performance rims and tires, motorcycle and van wheels
Suitable for 10" - 28" wheels and a max. tire Ø of 1143 mm. The central clamping device, which consists of a centering bolt and cone, is also suitable for inverted rims. With lateral bead breaker, self-locking wheel disc, 2 hydraulic bead breaker rollers and bead breaker bucket. The hydraulic bead breaker allows easy and safe work with low profile tires, rim protection rings and runflat tires. Tire / rim positioning (matching) is performed without disassembling the upper bead. The motor works with a special switch that controls the rotation speed by simply pressing the pedal. (Automatically slows down the rotation when the stress on the bead increases, to avoid tire damage), colour: anthracie / RAL 7016
Including half moon mounting iron

max. tire Ø: 1050mm (41"), max. rim width: 381mm (15")
Clamping table with adjustable jaws (in two positions), adjustable bead breaker opening, double-acting aluminum cylinder and a wide and reinforced housing for good rigidity and stability of the clamping table.
Technical data: self-centering lock externally clamped from 10" - 24", self-centering lock internally clamped from 12" - 26,5", working range of the assembly head from 8" - 24", force of the bead breaking device cylinder at 12 bar 3600kg, colour: anthracite / RAL 7016

Note: plus freight and discharge costs

max. tire diameter 1194mm, max. rim width 15"
Thanks to the innovative, leverless (patented) tool and the sophisticated automatic functions, fast, precise and effortless work is possible even with UHP - and run-flat tires. The diameter and position of all three operating arms can be adjusted with a single movement. Equipped with a pneumatic rotating bead downholder, trays for accessories, valves and tools, a mounting head made of rim-protecting material for working close to the edge of the rims without damaging them (Zero Stress Effect), pneumatic wheel lifter and inverter motor that allows the operator to variably control the wheel speed (0 - 15 rpm), colour: anthracie / RAL 7016

Note: plus freight and discharge costs

max. tire Ø: 1000mm (39"), max. tire width: 340mm (13")
Automatic tire changer, suitable for car and motorcycle tires. With tiltable mounting column, 2 speeds, pneumatic mounting arm lock and pneumatic bead presser.

Note: plus freight and discharge costs

Technical data:
rotation speed: 7 - 14 rpm
max. torque: 1200 Nm
motor power: 0,8 - 1,1 Kw
internal tension: 13" - 23" (adjustable from 12" - 22" or 14" - 24")
external tension: 11" - 21" (adjustable from 10" - 20" or 12" - 22")
working pressure: 10 bar (140 psi)
force of the bead breaker cylinder at 10 bar: 3000 kg

max. wheel Ø 39", working range bead breaker blade up to 12", clamping range 10" - 25"
Disc tire changer for problem-free processing of all common tire types. Key features such as fully automatic operation, the self-centring clamping plate and the removable pedal unit are standard on all models.

Note: plus freight and instruction costs