YUASA Battery "YTX9-BS"
Yuasa, MTF
Acid pack included. After removing the adhesive tape, attach the supplied acid pack and let it run evenly in all cells, then let it stand for 1-2 hours and at the and fasten the sealing.
Once filled and sealed, further maintenance is not necessary.
Attention: 12V batteries can be a recharge required!
Never open, pirce/drill nor remove the sealing strip of these sealed (MTF) batteries!
- Article number: 05407770
- Original number: YTX9-BS-CP
ETN: 508 012 008
DIN: 50812
Product information
- Bleeding: internal
- Capacity 10 Hr: 8.0 Ah
- Capacity 20 Hr: 8.4 Ah
- Cold start current CCA: 135 A
- Design: MTF , with acid pack
- Filling quantity: 0.4 l
- Height: 105.0 mm
- Length: 150.0 mm
- Minus pole: front right
- Plus pole: front left
- Range of application: motorcycle
- Screwing: M6
- Type: Article
- Voltage: 12V
- Width: 87.0 mm
- Supplier Article Number:: YTX9-BS-CP
- EAN: 5050694004483
- MSRP: €67.00
- Brand/Supplier YUASA
- Unit of measure: PIECE
| Article | Price | |
|---|---|---|
 BS-BATTERY Battery Charger "BS60" 12 Volt
| ||
 BS-BATTERY battery charger "BS15" 12 Volt
| ||
 BAAS Disconnect Switch "BA18" switch incl. cable
| ||
 BS-BATTERY Battery Charger "BS10" 6V/12V
|
| Article | Price | |
|---|---|---|
 BS-BATTERY Battery "BTX9 / BTX9-BS" MTFmaintenance-freeAttach the acid pack supplied after removing the adhesive strip and allow to run evenly into all cells. Leave to stand for about 1-2 hours and then press the sealing strip on firmly. Once filled, the battery is sealed and no further maintenance is necessary.CautionBatteries from 12 V may require recharging! Never open or drill into these sealed (MTF) batteries or remove the sealing strip!
|
Product variants
Using the search field, you can refine the selection of product variants.
| Article | Price | |
|---|---|---|
 YUASA Battery "YTX9-BS" Yuasa, MTF, sealed100% MTF - no need to refill water; necessary is only regular charging when not in use, first-class AGM technology (Absorbed Glass Matt) without free acid, sealed, leak-proof design for different installation positions, high performance OE battery, developed according to the individual specifications of the motorcycle manufacturers, sulfate barrier additive to prevent damage when the charge is too low, delivery is filled and ready for installation.
| ||
 YUASA Battery "YTX9-BS" Yuasa, MTFAcid pack included. After removing the adhesive tape, attach the supplied acid pack and let it run evenly in all cells, then let it stand for 1-2 hours and at the and fasten the sealing.Once filled and sealed, further maintenance is not necessary.Attention: 12V batteries can be a recharge required!Never open, pirce/drill nor remove the sealing strip of these sealed (MTF) batteries!
|