ATE Brake Bleeding Device "FB 5ev"

• Article number: 65589897
• Original number: 03.9302-1502.4

for filling, flushing and bleeding the modern electronic braking system, 5l, for low-viscosity brake fluids
Variable pressure setting from 0,4 to 3,5 bar for all pressure ranges of leading automobile manufacturers. The working pressures are adjusted to the desired working pressure with a rotary knob and can be controlled with a pressure gauge of class 1,6. A special pump generates a pulsating fluid flow that supports the complete flushing and bleeding of the brake system. It is filled directly from the 5 liter jug, so no refilling is necessary. Canister is securely fixed in the device. Suction lance is held securely in the container with a rubber sealing cone. If the container is empty, the pressure pump is switched off by permanent pressure monitoring. This ensures that no air can be pumped into the brake system. With the holder on the side of the device for the filling hose and the power cable, as well as holders for three vent nozzles on the rear wall of the device. Incl. air vents No.: 20.

Technical data:
brake fluid content: 5l
power supply: 230V ~ , 50 - 60 Hz
pump flow rate: approx. 24 l/h bei 2 bar counter-pressure
working pressure: 0,4-3,5 bar stepless
automatic final shutdown of the pump: at approx. 9mm remaining filling level in the container
connecting cable length: 5 m IEC
fillling hose length: 3,5m
dimensions (HxWxD): 530 x 285 x 250mm
noise level: 66 dB(A)
Scope of delivery: device, manual, air vents No.: 20