Battery "6N4C-1B"
ETN: 004 015 001
BS-BATTERY Battery 6N4A-4D
ETN: 004 013 001
DIN: 00413
BS-battery, standard, incl. acid pack
Standard batteries are dry pre-charged, fill the battery with the acid before use and leave open for approx. 1-2 hours, then attach bleeder hose and connect the battery.
Attention: by batteries from 12V evtl. must be recharged!
- Article number: 05379144
- Original number: 310513
BS-BATTERY Battery 6N4-2A
BS-battery, standard, incl. acid pack
Standard batteries are dry pre-charged, fill the battery with the acid before use and leave open for approx. 1-2 hours, then attach bleeder hose and connect the battery.
Attention: by batteries from 12V evtl. must be recharged!
- Article number: 05379169
- Original number: 310509
BS-BATTERY Battery 6N4B-2A
ETN: 004 012 001
DIN:412
BS-battery, standard, incl. acid pack
Standard batteries are dry pre-charged, fill the battery with the acid before use and leave open for approx. 1-2 hours, then attach bleeder hose and connect the battery.
Attention: by batteries from 12V evtl. must be recharged!
- Article number: 05379136
- Original number: 310514
Battery "6N4-2A-4"
ETN: 004 014 001
DIN: 00414
BS-battery, standard, incl. acid pack
Standard batteries are dry pre-charged, fill the battery with the acid before use and leave open for approx. 1-2 hours, then attach bleeder hose and connect the battery.
Attention: by batteries from 12V evtl. must be recharged!
- Article number: 05379151
- Original number: 310510
BS battery, SLA, sealed
Offers all advantages of a MTF battery, is already completely filled and ready to use. Is also specially developed for horizontal use.
- Article number: 05377924
- Original number: 300916
HAIJIU Battery "HB4L-B"
ETN: 504 011 002
DIN: 50411
Standard without acid pack
Standard batteries are pre-charged dry. Before commissioning, fill the battery with battery acids and leave it open for approx. 1-2 hours, then attach the bleed hose and connect the battery.
Attention: Batteries from 12 V may require recharging!
- Article number: 05376009
- Original number: HB4L-B W/O ACID
BS-BATTERY Battery 6N4B-2A-3
ETN: 004 012 001
DIN: 00412
BS-battery, standard, incl. acid pack
Standard batteries are dry pre-charged, fill the battery with the acid before use and leave open for approx. 1-2 hours, then attach bleeder hose and connect the battery.
Attention: by batteries from 12V evtl. must be recharged!
- Article number: 05379128
- Original number: 310515
BS-BATTERY Battery "YB3L-B"
ETN: 503 013 001
DIN: 50313
BS-battery, standard, incl. acid pack
Standard batteries are dry pre-charged, fill the battery with the acid before use and leave open for approx. 1-2 hours, then attach bleeder hose and connect the battery.
Attention: by batteries from 12V evtl. must be recharged!
- Article number: 05379680
- Original number: 310588
BS-battery, SLA, sealed
Offers all advantages of a MTF battery, is already completely filled and ready to use. Is also specially developed for horizontal use.
- Article number: 05378716
- Original number: 300842
BS-BATTERY Battery "6N6-3B"
ETN: 006 011 003
DIN: 00611
Standard, incl. acid pack
Standard batteries are pre-charged dry. Before commissioning, fill the battery with battery acids and leave it open for approx. 1-2 hours, then attach the bleed hose and connect the battery.
Attention: Batteries from 12 V may require recharging!
- Article number: 05379094
- Original number: 310518
HAIJIU Battery "HTX5L-BS"
ETN: 504 012 003
DIN: 50412
Haijiu, MTF
Acid pack included. After removing the adhesive tape, attach the supplied acid pack and let it run evenly in all cells, then let it stand for 1-2 hours and at the and fasten the sealing.
Once filled and sealed, further maintenance is not necessary.
Attention: 12V batteries can be a recharge required!
Never open, pirce/drill nor remove the sealing strip of these sealed (MTF) batteries!
- Article number: 05376033
- Original number: HTX5L-BS